.\" @(#) kermit.1 7.0.196 2000/01/01 Columbia University #ifdef COMMENT This man page must be run through the C-Kermit makefile before it can be used: "make manpage". Or you can do the following: cc -E ckuker.cpp | grep -v ^$ | grep -v ^\# > ckuker.nr to produce the nroff source file. THIS FILE MUST NOT CONTAIN ANY BLANK LINES! Use .sp or similar commands to produce blank lines in the nroff output. #endif /* COMMENT */ #ifdef SUNOS4 #define SUNOS #else #ifdef SUNOS41 #define SUNOS #else #ifdef SOLARIS #define SUNOS #endif #endif #endif #ifdef HPUX10 .TH KERMIT 1 "1 Jan 2000" "HP-UX C-Kermit" #define DIALOUT /dev/cul0p0 #define HARDWIRE /dev/tty0p0 #else .TH KERMIT 1C "1 Jan 2000" "UNIX C-Kermit" #ifdef LINUX #define DIALOUT /dev/ttyS0 #else #define DIALOUT /dev/cua #endif #define HARDWIRE /dev/tty01 #endif .SH NAME kermit \- C-Kermit 7.0 communications software for serial and network connections: modem dialing, file transfer and management, terminal connection, character-set translation, numeric and alpha paging, and script programming. .SH SYNOPSIS .B kermit [ command-file ] [ options ... ] .SH DESCRIPTION .I Kermit is a family of file transfer, management, and communication software programs from the Kermit Project at Columbia University available for most computers and operating systems. #ifdef HPUX10 The version of Kermit for Hewlett-Packard HP-UX, called #else #ifdef SUNOS The version of Kermit for SunOS and Solaris, called #else The UNIX version of Kermit, called #endif #endif .IR "C-Kermit", #ifdef HPUX10 supports both serial connections (direct or dialed) and TCP/IP connections. #else #ifdef SUNOS supports serial connections (direct or dialed), TCP/IP connections, and on systems equipped with SunLink X.25, C-Kermit can also make X.25 connections. #else supports serial connections (direct or dialed) and, in most UNIX implementations, also TCP/IP connections. On certain platforms, C-Kermit can also make X.25 connections. #endif #endif C-Kermit can be thought of as a user-friendly and powerful alternative to cu, tip, uucp, ftp, telnet, rlogin, expect, and even your shell; a single package for both network and serial communications, offering automation, convenience, and language features not found in the other packages, and having a great deal in common with its cousins, C-Kermit on other UNIX platforms, Kermit 95 for Windows 95, Windows 98, Windows NT and 2000, and OS/2; MS-DOS Kermit for PCs with DOS and Windows 3.x, and IBM Mainframe Kermit-370 for VM/CMS, MVS/TSO, and CICS. C-Kermit itself also runs on Digital VMS, Data General AOS/VS, Stratus VOS, OS-9, QNX, Plan 9, the Commodore Amiga, and elsewhere. Together, C-Kermit, Kermit 95, MS-DOS Kermit, and IBM Mainframe Kermit offer a consistent and nearly universal approach to inter-computer communications. .PP C-Kermit 7.0 is Copyright (C) 1985, 2000 by the Trustees of Columbia University in the City of New York. For use and redistribution rights, see the C-Kermit COPYING.TXT file or give the C-Kermit COPYRIGHT command (summary: no license is required for own use; no license is required for distribution with Open Source operating systems; a license is required for certain other forms of redistribution). .PP #ifdef HPUX10 C-Kermit 7.0 is included with HP-UX 10.00 and later by Hewlett-Packard in partnership with the Kermit Project at Columbia University. #endif .PP C-Kermit 6.0 is thoroughly documented in the book .IR "Using C-Kermit" by Frank da Cruz and Christine M. Gianone, Digital Press, Second Edition, 1997; see REFERENCES at the end of this manual page. This manual page is not a substitute for the book. If you are a serious user of C-Kermit, particularly if plan to write C-Kermit script programs, you should purchase the manual. Book sales are the primary source of funding for the nonprofit Kermit Project. .PP Any new features added since the second edition of the book was published are documented in the online file .IR "ckermit2.upd" until such time as the Third Edition of the book is ready. Hints, tips, limitations, restrictions are listed in .IR "ckcbwr.txt" (general C-Kermit) and .IR "ckuker.bwr" (UNIX-specific); see FILES below. Please consult all of these references before reporting problems or asking for technical support. .PP Kermit software is available for hundreds of different computers and operating systems from Columbia University. For best file-transfer results, please use C-Kermit in conjunction with real Columbia University Kermit software on other computers, such as Kermit 95 for Windows 95 and NT or MS-DOS Kermit for DOS 3.x or Windows. See CONTACTS below. .SH "MODES OF OPERATION" C-Kermit can be used in two "modes": remote and local. In .IR "remote mode", you connect to the #ifdef HPUX10 HP-UX #else UNIX #endif system from a desktop computer and transfer files between your desktop computer and #ifdef HPUX10 HP-UX #else UNIX #endif C-Kermit. In that case, connection establishment (dialing, TELNET connection, etc) is handled by the Kermit program on your desktop computer. .PP In .IR "local mode", C-Kermit establishes a connection to another computer by direct serial connection, by dialing a modem, or by making a network connection. When used in local mode, C-Kermit gives you a terminal connection to the remote computer, using your actual terminal, emulator, or UNIX workstation terminal window or console driver for specific terminal emulation. .PP C-Kermit also has two commands interfaces: the familiar UNIX-style command-line options, and an interactive dialog with a prompt. .IR "Command-line options" give you access to a small but useful subset of C-Kermit's features for terminal connection and file transfer, plus the ability to pipe files into or out of Kermit for transfer. .PP .IR "Interactive commands" give you access to dialing, script programming, character-set translation, and, in general, detailed control and display, as well as automation, of all C-Kermit's features. Interactive commands can also be collected into command files or macros. C-Kermit's command and script language is portable to many and diverse platforms. .PP .SH "STARTING C-KERMIT" .PP #ifdef HPUX10 You can start C-Kermit by typing "/usr/bin/kermit", or just "kermit" if your PATH includes "/usr/bin", possibly followed by command-line options. #else C-Kermit should be available as "kermit" somewhere in your PATH, perhaps as /usr/local/bin/kermit, in which case you can start C-Kermit just by typing "kermit", possibly followed by command-line options. #endif If there are no "action options" on the command line (explained below), C-Kermit starts in interactive command mode; you will see a greeting message and then the "C-Kermit>" prompt. If you do include action options on the command line, C-Kermit takes the indicated actions and then exits directly back to UNIX. Either way, C-Kermit executes the commands in its initialization file, #ifdef HPUX10 .IR "/usr/share/lib/kermit/ckermit.ini" , #else .IR ".kermrc" , in your home directory (or a system-wide directory if C-Kermit was built to do this) #endif before it executes any other commands, unless you have included the `\|\c .B \-Y\c \&\|' (uppercase) command-line option, which means to skip the initialization file, or you have included the `\|\c .B -y \c \&\| .IR "filename" \c \&\|' option to specify an alternative initialization file. .PP .SH "FILE TRANSFER" .PP Here is the most common scenario for Kermit file transfer. Many other methods are possible, most of them more convenient, but this basic method should work in all cases. .PP .in +0.5i .ll -0.5i .ta +0.2i .ti -0.2i \(bu Start Kermit on your local computer and establish a connection to the remote computer. If C-Kermit is on your local computer, use the sequence SET MODEM TYPE .IR "modem-name" \c \&\|, SET LINE .IR "device-name" \c \&\|, SET SPEED .IR "bits-per-second" \c \&\|, and DIAL .IR "phone-number" if you are dialing; SET LINE and SPEED for direct connections; SET NETWORK .IR "network-type" and SET HOST .IR "host-name-or-address" for network connections. .sp .ti -0.2i \(bu SET any other necessary communication parameters, such as PARITY, DUPLEX, and FLOW-CONTROL. .sp .ti -0.2i \(bu Give the CONNECT command. .sp .ti -0.2i \(bu Log in to the remote computer. .sp .ti -0.2i \(bu Start Kermit on the remote computer, give it any desired SET commands for file-, communication-, or protocol-related parameters. If you will be transferring binary files, give the command SET FILE TYPE BINARY to the Kermit program that will be sending them. .sp .ti -0.2i \(bu To .IR download a file or file group, give the remote Kermit a SEND command, following by a filename or "wildcard" file specification, for example: .nf .sp send oofa.txt (send one file) .sp .fi or: .nf .sp send oofa.* (send a group of files) .sp .fi To .IR upload a file or files, give the remote Kermit a RECEIVE command. The sending Kermit will tell the receiving Kermit the name (and other attributes) of each file. .sp .ti -0.2i \(bu Escape back to the Kermit program on your local (desktop) computer. If your local computer is running C-Kermit, type Ctrl-\\ c (Control-backslash followed by the letter 'c') (on NeXT workstations, use Ctrl-] c). If MS-DOS Kermit or Kermit 95, use Alt-x (hold down the Alt key, press 'x'). Now you should see your local Kermit program's prompt. .sp .ti -0.2i \(bu If you will be transferring binary files, give the command SET FILE TYPE BINARY to the Kermit program that is sending the files. .sp .ti -0.2i \(bu If you are .IR downloading files, tell the local Kermit program to RECEIVE. If you are .IR "uploading", give your local Kermit program a SEND command, specifying a filename or wildcard file specification. In other words, tell the .IR remote Kermit program what to do first, SEND or RECEIVE, then escape back to the .IR local Kermit and give it the opposite command, RECEIVE or SEND. .sp .ti -0.2i \(bu When the transfer is complete, give a CONNECT command. Now you are talking to Kermit on the remote computer again. Type EXIT to get back to the command prompt on the remote computer. When you are finished using the remote computer, log out and then (if necessary) escape back to Kermit on your local computer. Then you can make another connection or EXIT from the local Kermit program. .ll +0.5i .in -0.5i .fi .PP Note that other methods can be used to simplify the file-transfer process: .IR "client/server operation" , in which all commands are given to the client and passed on automatically to the server, and .IR autodownload (and upload), in which the remote Kermit initiates file transfers automatically through your terminal emulator. .PP The file transfer protocol defaults in C-Kermit 7.0, unlike those for earlier releases, favor speed over robustness, on the assumption that connections in these times are usually reliable (over TCP/IP and/or error-correcting modems with hardware flow control). If you experience file transfer failures, use the CAUTIOUS or ROBUST commands to choose more conservative (and therefore slower) protocol settings. For fine tuning of performance, you can choose specific packet lengths, window sizes, and control-character prefixing strategies as explained in Chapter 12 of the manual, .IR "Using C-Kermit". .PP If you are accessing a remote host where C-Kermit resides via Telnet or other connection that is guaranteed reliable from end to end, and both Kermits support it (C-Kermit 7.0 does), a new "streaming" form of the Kermit protocol is used automatically to give ftp-like speeds (the limiting factor being the overhead from the remote Telnet or Rlogin server and/or PTY driver). .SH OTHER FEATURES C-Kermit includes features too numerous to be explained in a man page. For further information about connection establishment, modem dialing, networks, terminal connection, key mapping, logging, file transfer options and features, troubleshooting, client/server operation, character-set translation during terminal connection and file transfer, "raw" up- and downloading of files, macro construction, script programming, sending numberic and alphanumeric pages, convenience features, and shortcuts, plus numerous tables, examples, and illustrations, please consult the manual and the C-Kermit 7.0 release notes. .SH "GETTING HELP" .PP C-Kermit has extensive built-in help. You can find out what commands exist by typing ? at the C-Kermit> prompt. You can type HELP at the C-Kermit> prompt for a "getting-started" message, or HELP followed by the name of a particular command for information about that command, for example: .nf .sp help send .sp .fi or: .nf .sp help set file .sp .fi You can type ? anywhere within a command to get brief help about the current command field. You can also type the INTRO command to get a brief introduction to C-Kermit, and the MANUAL command to access this (or another) man page. Finally, you can use the SUPPORT command for instructions on obtaining technical support. .sp .SH "ENTERING COMMANDS" .sp You can use upper or lower case for interactive-mode commands, but remember that UNIX filenames are case-sensitive. You can abbreviate command words (but not filenames) as long as the abbreviation matches only one possibility. While typing a command, you can use the following editing characters: .nf .sp Delete, Backspace, or Rubout erases the rightmost character. Ctrl-W erases the rightmost "word". Ctrl-U erases the current command line. Ctrl-R redisplays the current command. Ctrl-P recalls a previous command (scrolls back in command buffer). Ctrl-N scrolls forward in a scrolled-back command buffer. Ctrl-C cancels the current command. Tab, Esc, or Ctrl-I tries to complete the current keyword or filename. ? gives help about the current field. .sp .fi To enter the command and make it execute, press the Return or Enter key. .sp .SH BACKSLASH NOTATION Within an interactive command, the "\\" character (backslash) is a prefix used to enter special quantities, including ordinary characters that would otherwise be illegal or misinterpreted. Other than that, the character following the \\ identifies what the special quantity is: .nf .sp % A user-defined simple (scalar) variable such as \\%a or \\%1 & an array reference such as \\&a[3] $ an environment variable such as \\$(TERM) v (or V) a built-in variable such as \\v(time) f (or F) a function such as \\Fsubstring(\\%a,3,2) s (or S) compact substring notation, macronames, like \\s(foo[3:12]) : compact substring notation, all variables, like \\:(\%a[3:12]) d (or D) a decimal (base 10) number (1 to 3 digits, 0..255) such as \\d27 o (or O) an octal (base 8) number (1 to 3 digits, 0..377) such as \\o33 x (or X) a hexadecimal (base 16) number (2 digits, 00..ff) like \\x1b \\ the backslash character itself b (or B) the BREAK signal (OUTPUT command only) l (or L) a Long BREAK signal (OUTPUT only) n (or n) a NUL (0) character (OUTPUT only) a decimal digit (a 1-, 2-, or 3-digit decimal number) such as \\27 {} used for grouping, e.g. \\{27}123 anything else: following character taken literally. .sp .fi Note that numbers turn into the character with that binary code (0-255), so you can use \\7 for a bell, \\13 for carriage return, \\10 for linefeed. For example, to have C-Kermit send a BELL to your screen, type: .nf .sp echo \\7 .sp .fi .SH "COMMAND LIST" .PP The commands most commonly used, and important for beginners to know, are marked with "*": .nf .in 0 .ll 80 .ta 16 .sp Program Management: BACK Return to previous directory. BROWSE Invoke Web browser. * CD Change Directory. * PWD Print Working Directory. CHECK See if the given feature is configured. CLOSE Close the connection or a log or other local file. COMMENT Introduce a full-line comment. COPYRIGHT Display copyright notice. DATE Display date & time. * EXIT Leave the program, return to UNIX. * HELP Display a help message for a given command. * INTRO Print a brief introduction to C-Kermit. KERMIT Give command-line options at the prompt. LOG Open a log file -- debugging, packet, session, transaction. PUSH Invoke local system's interactive command interpreter. QUIT Synonym for EXIT. REDO Re-execute a previous command. RUN Run a program or system command. SET COMMAND Command-related parameters: bytesize, recall buffer size. SET PROMPT The C-Kermit program's interactive command prompt. SET EXIT Items related to C-Kermit's action upon exit or SET LINE/HOST. SHOW EXIT Display SET EXIT parameters. SHOW FEATURES Show features that C-Kermit was built with. SHOW VERSIONS Show version numbers of each source module. SUPPORT Find out how to get tech support. SUSPEND Suspend Kermit (use only if shell supports job control!). * SHOW Display values of SET parameters. * TAKE Execute commands from a file. VERSION Display the C-Kermit program version number. Z Synonym for SUSPEND. * Ctrl-C Interrupt a C-Kermit command in progress. Ctrl-Z Synonym for SUSPEND. ; or # Introduce a full-line or trailing comment. ! or @ Synonym for RUN. < Synonym for REDIRECT. .sp Connection Establishment and Release: * DIAL Dial a telephone number. PDIAL Partially dial a telephone number. * LOOKUP Lookup a phone number, test dialing rules. ANSWER Wait for a phone call and answer it when it comes. * HANGUP Hang up the phone or network connection. EIGHTBIT Shortcut to set all i/o to 8 bits. PAD Command for X.25 PAD (SunOS / Solaris / VOS only). PING Check status of remote TCP/IP host. REDIAL The the most recently DIALed number again. LOG CONNECTIONS Keep a record of each connection. REDIRECT Redirect standard i/o of command to communication connection. PIPE Make a connection through an external command or program. SET CARRIER Treatment of carrier on terminal connections. * SET DIAL Parameters related to modem dialing. * SET FLOW Communication line flow control: AUTO, RTS/CTS, XON/XOFF, etc. * SET HOST Open connection to network host name or address. #ifdef HPUX10 * SET LINE Open serial communication device, like /dev/cul0p0. #else * SET LINE Open serial communication device, like /dev/cua0. #endif SET PORT Synonym for SET LINE. * SET MODEM TYPE Specify type of modem on SET LINE device, like USR. * SET NETWORK Network type, X.25 (SunOS / Solaris / VOS only) or TCP/IP. SET TCP Specify TCP protocol options (advanced). SET TELNET Specify TELNET protocol options. SET X.25 Specify X.25 connection parameters (SunOS/Solaris/VOS only). SET PAD Specify X.25 X.3 PAD parameters (SunOS/Solaris/VOS only). * SET PARITY Character parity (none, even, etc) for communications. * SET SPEED Serial communication device speed, e.g. 2400, 9600, 57600. SET SERIAL Set serial communications data size, parity, stop bits. SET STOP-BITS Set serial communications stop bits. SHOW COMM Display communications settings. SHOW CONN Display info about current connection. SHOW DIAL Display SET DIAL values. SHOW MODEM Display modem type, signals, etc. SHOW NETWORK Display network-related items. * TELNET = SET NETWORK TCP/IP, SET HOST ..., CONNECT. RLOGIN Makes an RLOGIN connection (requires privilege). TELOPT Send a TELNET option negotiation (advanced). CLOSE Close the current connection. .sp Terminal Connection: * C Special abbreviation for CONNECT. * CONNECT Establish a terminal connection to a remote computer. LOG SESSION Record terminal session. SET COMMAND Bytesize between C-Kermit and your keyboard and screen. * SET DUPLEX Specify which side echoes during CONNECT. SET ESCAPE Prefix for "escape commands" during CONNECT. SET KEY Key redefinitions in CONNECT mode. SET TERMINAL Terminal connection items: bytesize, character-set, echo, etc. SHOW ESCAPE Display current CONNECT-mode escape character. SHOW KEY Display keycode and assigned value or macro. SHOW TERMINAL Display SET TERMINAL items. * Ctrl-\\ CONNECT-mode escape character, follow by another character: C to return to C-Kermit> prompt. B to send BREAK signal. ? to see other options. .sp File Transfer: ADD SEND-LIST Add a file specification to the SEND-LIST ADD BINARY-PATTERNS Add a pattern to the binary file pattern list ADD TEXT-PATTERNS Add a pattern to the text file pattern list ASSOCIATE A file character-set with a transfer character-set LOG SESSION Download a file with no error checking * SEND Send a file or files. MSEND Multiple SEND - accepts a list of files, separated by spaces. MOVE SEND and then delete source file(s) if successful. MMOVE Multiple MOVE - accepts a list of files, separated by spaces. MAIL SEND a file to other Kermit, to be delivered as e-mail. RESEND Continue a incomplete SEND. PSEND Send part of a file. * RECEIVE Passively wait for files to arrive from other Kermit. * R Special abbreviation for RECEIVE. * S Special abbreviation for SEND. GET Ask server to send the specified file(s). MGET Like GET but accepts a list of files. REGET Continue a incomplete download from a server. G Special abbreviation for GET. FAST Shortcut for fast file-transfer settings. CAUTIOUS Shortcut for medium file-transfer settings. ROBUST Shortcut for conservative file-transfer settings. SET ATTRIB Control transmission of file attributes. * SET BLOCK Choose error-checking level, 1, 2, or 3. SET BUFFERS Size of send and receive packet buffers. SET PREFIX Which control characters to "unprefix" during file transfer. SET DELAY How long to wait before sending first packet. SET DESTINATION DISK, PRINTER, or SCREEN for incoming files. * SET FILE Transfer mode (type), character-set, collision action, etc. * SET RECEIVE Parameters for inbound packets: packet-length, etc. SET REPEAT Repeat-count compression parameters. SET RETRY Packet retransmission limit. SET SEND Parameters for outbound packets: length, etc. SET HANDSHAKE Communication line half-duplex packet turnaround character. SET LANGUAGE Enable language-specific character-set translations. SET PATTERNS Turn off filename-pattern-based text/binary mode switching. SET SESSION-LOG File type for session log, text or binary. SET TRANSFER File transfer parameters: character-set, display, etc. SET TRANSMIT Control aspects of TRANSMIT command execution. SET UNKNOWN Specify handling of unknown character sets. * SET WINDOW File transfer packet window size, 1-31. SHOW ATTRIB Display SET ATTRIBUTE values. SHOW CONTROL Display control-character prefixing map. * SHOW FILE Display file-related settings. SHOW PROTOCOL Display protocol-related settings. SHOW LANGUAGE Display language-related settings. SHOW TRANSMIT Display SET TRANSMIT values. * STATISTICS Display statistics about most recent file transfer. TRANSMIT Send a file with no error checking. XMIT Synonym for TRANSMIT. .sp SEND Command switches: /AS-NAME: Name to send file under /AFTER: Send files modified after date-time /BEFORE: Send files modified before date-time /BINARY Send in binary mode /COMMAND Send from standard output of a command /DELETE Delete file after successfully sending /EXCEPT: Don't send files whose names match given pattern(s) /FILTER: Pass file contents through given filter program /FILENAMES: Specify how to send filenames /LARGER-THAN: Send files larger than given size /LIST: Send files whose names are listed in given file /MAIL: Send file(s) as e-mail to given address /MOVE-TO: Move source file to given directory after successfully sending /NOT-AFTER: Send files modified not after given date-time /NOT-BEFORE: Send files modified not before given date-time /PATHNAMES: Specifiy how to send pathnames /PRINT: Send files to be printed /PROTOCOL: Send files using given protocol /QUIET Don't display file-transfer progress /RECOVER Recover interrupted transfer from point of failure /RECURSIVE Send a directory tree /RENAME-TO: Rename files as specified after successfully sending /SMALLER-THAN: Send files smaller than given size /STARTING-AT: Send file starting at given byte number /SUBJECT: Subject for SEND /MAIL /TEXT Send in text mode .sp GET and RECEIVE Command switches: /AS-NAME: Store incoming file under given name /BINARY Receive in binary mode if transfer mode not specified /COMMAND: Send incoming file data to given command /EXCEPT: Don't accept incoming files whose names match /FILENAMES: How to treat incoming file names /FILTER: Filter program for incoming file data /MOVE-TO: Where to move a file after succussful receipt. /PATHNAMES: How to treat incoming path names /PROTOCOL: Protocol to use for receiving (RECEIVE only) /RENAME-TO: New name for file after succussful receipt. /QUIET: Suppress file-transfer display /TEXT Receive in text mode if transfer mode not specified .sp Switches only for GET: /DELETE Tells server to delete each file after successful transmission /RECOVER Resume interrupted file transfer from point of failure /RECURSIVE Tells server to send a directory tree .sp File Management: * CD Change Directory. * PWD Display current working directory. COPY Copy a file. * DELETE Delete a file or files. * DIRECTORY Display a directory listing. EDIT Edit a file. MKDIR Create a directory. PRINT Print a local file on a local printer. PURGE Remove backup files. RENAME Change the name of a local file. RMDIR Remove a directory. SET PRINTER Choose printer device. SPACE Display current disk space usage. SHOW CHARACTER-SETS Display character-set translation info. TRANSLATE Translate a local file's character set. TYPE Display a file on the screen TYPE /PAGE Display a file on the screen, pausing after each screenful. XLATE Synonym for TRANSLATE. .sp Client/Server operation: BYE Terminate a remote Kermit server and log out its job. DISABLE Disallow access to selected features during server operation: E-PACKET Send an Error packet. ENABLE Allow access to selected features during server operation. FINISH Instruct a remote Kermit server to exit, but not log out. G Special abbreviation for GET. GET Get files from a remote Kermit server. QUERY (Same as REMOTE QUERY) RETRIEVE Like GET but server deletes files after. REMOTE xxx Command for server, can be redirected with > or |. REMOTE ASSIGN (RASG) Assign a variable REMOTE CD (RCD) Tell remote Kermit server to change its directory. REMOTE COPY (RCOPY) Tell server to copy a file. REMOTE DELETE (RDEL) Tell server to delete a file. REMOTE DIR (RDIR) Ask server for a directory listing. REMOTE EXIT (REXIT) Ask the server program to exit. REMOTE HELP (RHELP) Ask server to send a help message. REMOTE HOST (RHOST) Ask server to ask its host to execute a command. REMOTE KERMIT (RKER) Send an interactive Kermit command to the server. REMOTE LOGIN Authenticate yourself to a remote Kermit server. REMOTE LOGOUT Log out from a Kermit server previously LOGIN'd to. REMOTE MKDIR (RMKDIR) Tell the server to create a directory. REMOTE PRINT (RPRINT) Print a local file on the server's printer. REMOTE PWD (RPWD) Ask server to reveal its current (working) directory. REMOTE QUERY (RQUERY) Get value of a variable. REMOTE RENAME (RRENAME) Tell server to rename a file. REMOTE RMDIR (RRMDIR) Tell server to remove a directory. REMOTE SET (RSET) Send a SET command to a remote server. REMOTE SPACE (RSPACE) Ask server how much disk space it has left. REMOTE TYPE (RTYPE) Ask server to display a file on your screen. REMOTE WHO (RWHO) Ask server for a "who" or "finger" listing. SERVER Enter server mode - be a Kermit server. SET SERVER Set parameters for server operation. SHOW SERVER Show SET SERVER, ENABLE/DISABLE items. .sp Script programming: ASK Prompt the user, store user's reply in a variable. ASKQ Like ASK, but, but doesn't echo (useful for passwords). ASSERT Evaluate condition and set SUCCESS/FAILURE accordingly. ASSIGN Assign an evaluated string to a variable or macro. CLEAR Clear communication device input buffer or other item. CLOSE Close the connection, or a log or other file. DECLARE Declare an array. DECREMENT Subtract one (or other number) from a variable. DEFINE Define a variable or macro. DO Execute a macro ("DO" can be omitted). ECHO Display text on the screen. ELSE Used with IF. END A command file or macro. EVALUATE an arithmetic expression. FAIL Set FAILURE. FOPEN Open a local file FREAD Read from a file opened with FOPEN FWRITE Write to an FOPEN'd file FSEEK Seeks to given position in FOPEN'd file FCLOSE Close an FOPEN'd file FOR Execute commands repeatedly in a counted loop. FORWARD GOTO in the forward direction only. GETC Issue a prompt, get one character from keyboard. GETOK Ask question, get Yes or No answer, set SUCCESS or FAILURE. GOTO Go to a labeled command in a command file or macro. IF Conditionally execute the following command. INCREMENT Add one (or other number) to a variable. INPUT Match characters from another computer against a given text. LOCAL Declare local variables in a macro MINPUT Like INPUT, but allows several match strings. MSLEEP Sleep for given number of milliseconds. OPEN Open a local file for reading or writing. OUTPUT Send text to another computer. O Special abbreviation for OUTPUT. PAUSE Do nothing for a given number of seconds. READ Read a line from a local file into a variable. REINPUT Reexamine text previously received from another computer. RETURN Return from a user-defined function. SCREEN Screen operations - clear, position cursor, etc. SCRIPT Execute a UUCP-style login script. SET ALARM Set a timer to be used with IF ALARM; SHOW ALARM shows it. SET CASE Treatment of alphabetic case in string comparisons. SET COMMAND QUOTING turns on/off interpretation of backslash notation. SET COUNT For counted loops. SET INPUT Control behavior of INPUT command. SET MACRO Control aspects of macro execution. SET TAKE Control aspects of TAKE file execution. SHIFT Shift macro arguments left the given number of places. SHOW ARGUMENTS Display arguments to current macro. SHOW ARRAYS Display information about active arrays. SHOW COUNT Display current COUNT value. SHOW FUNCTIONS List names of available \\f() functions. SHOW GLOBALS List defined global variables \\%a..\\%z. SHOW MACROS List one or more macro definitions. SHOW SCRIPTS Show script-related settings. SHOW VARIABLES Display values all \\v() variables. SLEEP Sleep for given number of seconds. SORT Sort an array (many options). STATUS Show SUCCESS or FAILURE of previous command. STOP Stop executing macro or command file, return to prompt. SUCCEED Set SUCCESS. SWITCH Execute selected command(s) based on value of variable. TAKE Execute commands from a file. UNDEFINE Undefine a variable WAIT Wait for the specified modem signals. WHILE Execute commands repeatedly while a condition is true. WRITE Write material to a local file. WRITE-LINE Write a line (record) to a local file. WRITELN Synonym for WRITE-LINE. XECHO Like ECHO but no CRLF at end. XIF Extended IF command. .ll .in .fi .SH "BUILT-IN VARIABLES" Built-in variables are referred to by \\v(name), can be used in any command, usually used in script programming. They cannot be changed. Type SHOW VARIABLES for a current list. .nf .sp \\v(argc) number of arguments in current macro \\v(args) number of program command-line arguments \\v(blockcheck)current SET BLOCK-CHECK type \\v(browser) current Web browser \\v(browsopts) current Web browser options \\v(browsurl) most recent Web browser site (URL) \\v(byteorder) hardware byte order \\v(charset) current file character-set \\v(cmdbufsize)size of command buffer \\v(cmdfile) name of current command file, if any \\v(cmdlevel) current command level \\v(cmdsource) where command are currently coming from, macro, file, etc. \\v(cols) number of screen columns \\v(connection)connection type: serial, tcp/ip, etc. \\v(count) current COUNT value \\v(cps) speed of most recent file transfer in chars per second \\v(cpu) CPU type C-Kermit was built for \\v(crc16) 16-bit CRC of most recent file transfer \\v(ctty) device name of controlling terminal \\v(d$ac) SET DIAL AREA-CODE value \\v(d$cc) SET DIAL COUNTRY-CODE value \\v(d$ip) SET DIAL INTL-PREFIX value \\v(d$lc) SET DIAL LD-PREFIX value \\v(d$px) SET DIAL PBX-EXCHANGE value \\v(date) date as 8 Feb 1999 \\v(day) day of week (English 3-letter abbreviation) \\v(dialcount) current value of DIAL retry counter \\v(dialnumber)phone number most recently dialed \\v(dialresult)most recent dial result message or code from modem \\v(dialstatus)return code from DIAL command (0 = OK, 22 = BUSY, etc) \\v(dialsuffix)current SET DIAL SUFFIX value \\v(dialtype) code for type of call most recently placed \\v(directory) current/default directory \\v(download) current download directory if any \\v(editor) your preferred editor \\v(editfile) file most recently edited \\v(editopts) options for editor \\v(errno) current "errno" (system error number) value \\v(errstring) error message string associated with errno \\v(escape) decimal ASCII value of CONNECT-mode escape character \\v(evaluate) result of most recent EVALUATE command \\v(exitstatus)current EXIT status (0 = good, nonzero = something failed) \\v(filename) name of file currently being transferred \\v(filenumber)number of file currently being transferred (1 = first, etc) \\v(filespec) filespec given in most recent SEND/RECEIVE/GET command \\v(fsize) size of file most recently transferred \\v(ftype) SET FILE TYPE value (text, binary) \\v(herald) C-Kermit's program herald \\v(home) home directory \\v(host) computer host name (comuter where C-Kermit is running) \\v(hwparity) SET PARITY HARDWARE setting (if any) \\v(input) current INPUT buffer contents \\v(inchar) character most recently INPUT \\v(incount) how many characters arrived during last INPUT \\v(inidir) directory where initialization file was found \\v(inmatch) [M]INPUT material that matched given \\fpattern(). \\v(instatus) status of most recent INPUT command \\v(intime) how long it took most recent INPUT to succeed (msec) \\v(inwait) most recent [M]INPUT time limit \\v(ipaddress) IP address of C-Kermit's computer if known \\v(kbchar) keyboard character that interrupted PAUSE, INPUT, etc. \\v(line) current communications device, set by LINE or HOST \\v(local) 0 if in remote mode, 1 if in local mode \\v(lockdir) UUCP lockfile directory on this platform \\v(lockpid) Process ID found in lockfile when port is in use \\v(maclevel) Current macro stack level \\v(macro) name of currently executing macro, if any \\v(math_e) Floating-point constant e \\v(math_pi) Floating-point constant pi \\v(math_precision) Floating point number precision (digits) \\v(minput) Result of most recent MINPUT command \\v(model) Computer hardware model if known \\v(modem) Current modem type or "none" \\v(m_aa_off) Modem command to turn autoanswer off \\v(m_aa_on) Modem command to turn autoanswer on \\v(m_xxxxx) (many other modem commands) \\v(m_sig_xx) Value of modem signal xx \\v(name) Name by which C-Kermit was called (kermit, wermit, etc) \\v(ndate) Current date as 19930208 (yyyymmdd) \\v(nday) Numeric day of week (0 = Sunday) \\v(newline) System-independent newline character or sequence \\v(ntime) Current local time in seconds since midnight (noon = 43200) \\v(osname) Operating System name \\v(osrelease) Operating System release \\v(osversion) Operating System version \\v(packetlen) Current SET RECEIVE PACKET-LENGTH value \\v(parity) Current parity setting \\v(pexitstat) Exit status of most recently forked process \\v(pid) C-Kermit's process ID \\v(platform) Specific machine and/or operating system \\v(printer) Current SET PRINTER value or "(default)" \\v(program) Name of this program ("C-Kermit") \\v(protocol) Currently selected file transfer protocol \\v(p_8bit) Current 8th-bit prefix (Kermit protocol) \\v(p_ctl) Current control-character prefix (Kermit protocol) \\v(p_rpt) Current repeat-count prefix (Kermit protocol) \\v(query) Result of most recent REMOTE QUERY command \\v(return) Most recent RETURN value \\v(rows) Number of rows on the terminal screen \\v(sendlist) Number of entries in SEND-LIST \\v(serial) Serial port settings in 8N1 format \\v(speed) Current serial device speed, if known, or "unknown" \\v(startup) Current directory when C-Kermit was started \\v(status) 0 or 1 (SUCCESS or FAILURE of previous command) \\v(sysid) Code for platform ID of C-Kermit's computer (U1=UNIX) \\v(system) UNIX (name of operating system family) \\v(terminal) Terminal type \\v(test) C-Kermit test version, if any (e.g. Beta.10) \\v(textdir) Where C-Kermit thinks its text files are \\v(tfsize) Total size of file group most recently transferred \\v(tftime) Transfer time of most recent file group \\v(time) Time as 13:45:23 (hh:mm:ss, 24-hour format) \\v(tmpdir) Temporary directory \\v(trigger) Most recent string to trigger return from CONNECT \\v(ttyfd) File descriptor of current communication device \\v(ty_xx) Used internally by TYPE \\v(userid) User ID of person running C-Kermit \\v(version) Numeric version of Kermit, e.g. 501190. \\v(window) Current window size (SET WINDOW value) \\v(xferstatus)Status of most recent file transfer \\v(xfermsg) Error message, if any, terminating most recent transfer \\v(xfer_xxx) Various statistics from last file transfer. \\v(xprogram) C-Kermit \\v(xversion) Same as \\v(version) .fi .SH "BUILT-IN FUNCTIONS" Builtin functions are invoked as \\Fname(args), can be used in any command, and are usually used in script programs. Type SHOW FUNCTIONS for a current list. Type "help function " for a description of the arguments and return value, e.g. "help function basename". .SH "COMMAND LINE OPTIONS" .PP C-Kermit accepts commands (or "options") on the command line, in the time-honored UNIX style. Alphabetic case is significant. All options are optional. If one or more action options are included, Kermit exits immediately after executing the command-line options, otherwise it enters interactive command mode. .nf .ll 80 .sp kermit [filename] [-x arg [-x arg]...[-yyy]..]] .sp where: .sp filename is the name of a command file to execute, -x is an option requiring an argument, -y an option with no argument. .ta 15 .sp Actions: -s files send files -s - send files from stdin -r receive files -k receive files to stdout -x enter server mode -O like -x but exits after one transaction -f finish remote server -g files get remote files from server (quote wildcards) -G files like -g but sends file to standard output -a name alternate file name, used with -s, -r, -g -c connect (before file transfer), used with -l or -j -n connect (after file transfer), used with -l or -j .sp Settings: -l line communication line device (to make a serial connection) -l n open file descriptor of communication device -j host TCP/IP network host name (to make a network connection) -J host Connect like TELNET, exit when connection closes -l n open file descriptor of TCP/IP connection (n = number) -X X.25 network address -Z open file descriptor of X.25 connection -o n X.25 closed user group call info -u X.25 reverse-charge call -q quiet during file transfer -I connection is reliable (e.g. TCP or X.25) -8 connection is 8-bit clean -0 100% transparency in CONNECT mode (and no escaping back) -i transfer files in binary mode -T transfer files in text mode -P send/accept literal path (file) names -V = SET FILE PATTERNS OFF and SET XFER MODE MANUAL -b bps serial line speed, e.g. 1200 -m name modem type, e.g. hayes -p x parity, x = e,o,m,s, or n -t half duplex, xon handshake -e n receive packet-length -v n window size -L used with -s to select recursive directory transfer -Q Quick file-transfer settings -w write over files of same name, don't backup old file -D n delay n seconds before sending a file -V "manual mode" = SET FILE PATTERNS OFF, SET TRANSFER MODE MANUAL. .sp Other: -y name alternate init file name -Y Skip init file -R Advise C-Kermit it will be used only in remote mode -d log debug info to file debug.log -S Stay, don't exit, after action command -C "cmds" Interactive-mode commands, comma-separated -z Force foreground operation -B Force background (batch) operation -h print command-line option help screen = Ignore all text that follows but assign them to \\%1..\\%9 -- Same as = .sp .fi .SH "COMMAND LINE EXAMPLES" .PP Remote-mode example (C-Kermit is on the far end): .nf .sp kermit -v 4 -i -s oofa.bin .sp .fi sends file oofa.bin in binary mode (-i) using a window size of 4 (-v 4). .sp Local-mode example (C-Kermit makes the connection): .nf .sp kermit -l HARDWIRE -b 19200 -c -r -n .sp .fi makes a 19200-bps direct connection out through HARDWIRE, CONNECTs (-c) so you can log in and, presumably start a remote Kermit program and tell it to send a file, then it RECEIVEs the file (-r), then it CONNECTs back (-n) so you can finish up and log out. .sp For dialing out, you must specify a modem type, and you might have to use a different device name: .nf .sp kermit -m hayes -l DIALOUT -b 2400 -c -r -n .ll .in .fi .SH FILES .nf .ta 16 #ifndef HPUX10 $HOME/.kermrc Standard C-Kermit initialization commands. #endif /* HPUX10 */ $HOME/.mykermrc Your personal C-Kermit customization file. $HOME/.kdd Your personal dialing directory. $HOME/.ksd Your personal services directory. #ifdef HPUX10 .sp /usr/share/lib/kermit/READ.ME Overview of HP-UX C-Kermit, please read /usr/share/lib/kermit/COPYING.TXT Copyright, permissions, disclaimer /usr/share/lib/kermit/ckermit.ini System-wide initialization file /usr/share/lib/kermit/ckermod.ini Sample customization file /usr/share/lib/kermit/ckermit.kdd Sample dialing directory /usr/share/lib/kermit/ckermit.ksd Sample services directory /usr/share/lib/kermit/ckermit2.txt Updates to "Using C-Kermit" 2nd Ed /usr/share/lib/kermit/ckcbwr.txt C-Kermit "beware" file - hints & tips /usr/share/lib/kermit/ckubwr.txt UNIX-specific beware file /usr/share/lib/kermit/ck*.txt Other plain-text documentation /usr/share/lib/kermit/ckedemo.ksc Macros from "Using C-Kermit" /usr/share/lib/kermit/ckevt.ksc Ditto /usr/share/lib/kermit/ckepage.ksc Alpha pager script /var/spool/locks/LCK..* UUCP lockfiles #else .fi .PP The following should be in a publicly accessible plain-text documentation area, such as usr/local/lib/kermit, /usr/local/doc, or /usr/share/lib/kermit, or available via an information server such as gopher, or by ftp from Columbia: .nf .ta 16 .sp COPYING.TXT Copyright, permissions, disclaimer. ckaaaa.hlp Explanation of C-Kermit files. ckermit.ini Standard initialization file. ckermod.ini Sample C-Kermit customization file. ckermit.kdd Sample dialing directory. ckermit.ksd Sample services directory. ckermit2.txt Supplement to "Using C-Kermit" 2nd Ed. ckcbwr.txt C-Kermit "beware" file - hints & tips. ckubwr.txt UNIX-specific beware file. ck*.txt Other plain-text documentation. ckedemo.ksc Demonstration macros from "Using C-Kermit". ckevt.ksc Ditto. ckepage.ksc Alpha pager script. #endif .fi .PP #ifndef HPUX10 If C-Kermit has not been installed on your system with the system-wide initialization file feature, then the ckermit.ini file should be copied to your home (login) directory and renamed to .IR ".kermrc" . You should not modify this file. .sp #endif To make .IR "personalized customizations" , copy the file #ifdef HPUX10 /usr/share/lib/kermit/ckermod.ini #else ckermod.ini #endif file to your home directory, make any desired changes, and rename it to .IR ".mykermrc" . .sp You may also create a personalized .IR "dialing directory" like the sample one in #ifdef HPUX10 /usr/share/lib/kermit/ckermit.kdd. #else ckermit.kdd. #endif Your personalized dialing directory should be stored in your home directory as .IR ".kdd" and your personal network directory as .IR ".knd" . See Chapters 5 and 6 of .IR "Using C-Kermit" for details. .sp And you may also create a personalized .IR "services directory" like the sample one in #ifdef HPUX10 /usr/share/lib/kermit/ckermit.ksd. #else ckermit.ksd. #endif Your personalized services directory should be stored in your home directory as .IR ".ksd" . See Chapter 7 of .I "Using C-Kermit" for instructions. .sp The demonstration files illustrate C-Kermit's script programming constructs; they are discussed in chapters 17-19 of the book. You can run them by typing the appropriate TAKE command at the C-Kermit> prompt, for example: "take /usr/share/lib/kermit/ckedemo.ini". .PD .SH AUTHORS Frank da Cruz, Columbia University, with contributions from hundreds of other volunteer programmers all over the world. See Acknowledgements in .IR "Using C-Kermit". .SH REFERENCES .TP Frank da Cruz and Christine M. Gianone, .IR "Using C-Kermit", Second Edition, 1997, 622 pages, Digital Press / Butterworth-Heinemann, 313 Washington Street, Newton, MA 02158-1626, USA. ISBN 1-55558-164-1. (In the USA, call +1 800 366-2665 to order Digital Press books.) Also available in a German edition from Verlag Heinze Heise, Hannover. .sp .TP Frank da Cruz, .IR "Kermit, A File Transfer Protocol", Digital Press / Butterworth-Heinemann, Woburn, MA, USA (1987). ISBN 0-932376-88-6. The Kermit file transfer protocol specification. .TP Christine M. Gianone, .IR "Using MS-DOS Kermit", Digital Press / Butterworth-Heinemann, Woburn, MA, USA (1992). ISBN 1-5558-082-3. Also available in a German edition from Heise, and a French edition from Heinz Schiefer & Cie, Versailles. .TP .IR "Kermit News", Issues 4 (1990) and 5 (1993), Columbia University, for detailed discussions of Kermit file transfer performance. .SH DIAGNOSTICS The diagnostics produced by .I C-Kermit itself are intended to be self-explanatory. In addition, every command returns a SUCCESS or FAILURE status that can be tested by IF FAILURE or IF SUCCESS. In addition, the program itself returns an exit status code of 0 upon successful operation or nonzero if any of various operations failed. .SH BUGS See the comp.protocols.kermit.* newsgroups on Usenet for discussion, or the files ckcbwr.txt and ckubwr.txt, for a list of bugs, hints, tips. etc. Report bugs via e-mail to kermit-support@columbia.edu. Visit http://www.columbia.edu/kermit/support.html for details about tech support. .SH CONTACTS For more information about Kermit software and documentation, visit the Kermit Web site: .nf .sp http://www.columbia.edu/kermit/ .sp .fi Or write to: .nf .sp The Kermit Project Columbia University 612 West 115th Street New York NY 10025-7799 USA .sp .fi Or send e-mail to kermit@columbia.edu. Or call +1 212 854-3703. Or fax +1 212 663-8202. .br