diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 8f90d9e..969c312 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -621,6 +621,11 @@ struct aac_driver_ident #define AAC_QUIRK_SCSI_32 0x0020 /* + * SRC based adapters support the AifReqEvent functions + */ +#define AAC_QUIRK_SRC 0x0040 + +/* * The adapter interface specs all queues to be located in the same * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index a943bd2..79871f3 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -236,10 +236,10 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */ - { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 7 (Denali) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 8 */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Series 9 */ + { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */ }; /** @@ -1299,7 +1299,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) else shost->this_id = shost->max_id; - aac_intr_normal(aac, 0, 2, 0, NULL); + if (aac_drivers[index].quirks & AAC_QUIRK_SRC) + aac_intr_normal(aac, 0, 2, 0, NULL); /* * dmb - we may need to move the setting of these parms somewhere else once diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 6a4df5a..6bff13e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -7975,13 +7975,14 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, ActiveCableEventData = (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData; if (ActiveCableEventData->ReasonCode == - MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) + MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) { pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d", ioc->name, ActiveCableEventData->ReceptacleID); pr_info("cannot be powered and devices connected to this active cable"); pr_info("will not be seen. This active cable"); pr_info("requires %d mW of power", ActiveCableEventData->ActiveCablePowerRequirement); + } break; default: /* ignore the rest */ diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b2e332a..c71344a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -821,9 +821,12 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) } /* - * If we finished all bytes in the request we are done now. + * special case: failed zero length commands always need to + * drop down into the retry code. Otherwise, if we finished + * all bytes in the request we are done now. */ - if (!scsi_end_request(req, error, good_bytes, 0)) + if (!(blk_rq_bytes(req) == 0 && error) && + !scsi_end_request(req, error, good_bytes, 0)) return; /* diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 428c03e..f459dff 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1398,11 +1398,15 @@ static int media_not_present(struct scsi_disk *sdkp, **/ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) { - struct scsi_disk *sdkp = scsi_disk(disk); - struct scsi_device *sdp = sdkp->device; + struct scsi_disk *sdkp = scsi_disk_get(disk); + struct scsi_device *sdp; struct scsi_sense_hdr *sshdr = NULL; int retval; + if (!sdkp) + return 0; + + sdp = sdkp->device; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); /* @@ -1459,6 +1463,7 @@ out: kfree(sshdr); retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; sdp->changed = 0; + scsi_disk_put(sdkp); return retval; }