Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.41 (INSTALL_LARGE) #8: Mon Dec 10 15:19:45 GMT 2007 mjf@nbsd.console-pimps.org:/home/mjf/obj/NetBSD/HEAD/i386/obj/sys/arch/i386/compile/INSTALL_LARGE total memory = 503 MB avail memory = 483 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xf0010 SMBIOS rev. 2.5 @ 0xf06c0 (37 entries) ASUSTeK Computer INC. 701 (x.x) mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: Intel Pentium M (Dothan) (686-class), 630.10 MHz, id 0x6d6 cpu0: features afe9fbbf cpu0: features afe9fbbf cpu0: features afe9fbbf cpu0: "Intel(R) Celeron(R) M processor 900MHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: using thermal monitor 1 cpu0: calibrating local timer cpu0: apic clock running at 70 MHz timecounter: Timecounter "lapic" frequency 70007225 Hz quality 2100 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20070320 acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured MCH (PNP0C01) [System Board] at acpi0 not configured PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured DMAD (PNP0200) [AT DMA Controller] at acpi0 not configured TMR (PNP0100) [AT Timer] at acpi0 not configured RTC0 (PNP0B00) [AT Real-Time Clock] at acpi0 not configured PS2K (PNP0303) [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured PS2M (SYN0A00) at acpi0 not configured SPKR (PNP0800) [AT-style speaker sound] at acpi0 not configured COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured EC0 (PNP0C09) [ACPI Embedded Controller] at acpi0 not configured RMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured OMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured PCIE (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured BAT0 (PNP0C0A) [ACPI Control Method Battery] at acpi0 not configured AC0 (ACPI0003) [AC Device] at acpi0 not configured PCIE (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured RMEM (PNP0C01) [System Board] at acpi0 not configured ATKD (ASUS010) at acpi0 not configured LID (PNP0C0D) [ACPI lid device] at acpi0 not configured SLPB (PNP0C0E) [ACPI sleep button device] at acpi0 not configured PWRB (PNP0C0C) [ACPI power button device] at acpi0 not configured LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured TZ00 (ACPI Object Type 'Thermal' [0x0d]) at acpi0 not configured pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x2590 (rev. 0x04) pchb0: returns constant 0xff stream, RNG disabled. agp at pchb0 not configured vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 direct rendering for vga1 unsupported vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured vendor 0x8086 product 0x2668 (multimedia subclass 0x03, revision 0x04) at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04) pci1 at ppb0 bus 4 pci1: no spaces enabled! ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04) pci2 at ppb1 bus 3 pci2: memory space enabled, rd/line, wr/inv ok lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet atl2_reset lii0: Ethernet address 00:1e:8c:27:7e:55 lii0: interrupting at ioapic0 pin 17 (irq 11) ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x00c82e, model 0x0002, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04) pci3 at ppb2 bus 1 pci3: memory space enabled, rd/line, wr/inv ok ath0 at pci3 dev 0 function 0 ath0: interrupting at ioapic0 pin 18 (irq 10) ath0: unable to attach hardware; HAL status 13 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04) uhci0: interrupting at ioapic0 pin 23 (irq 3) usb0 at uhci0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0 at usb0 uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04) uhci1: interrupting at ioapic0 pin 19 (irq 7) usb1 at uhci1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1 at usb1 uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04) uhci2: interrupting at ioapic0 pin 18 (irq 10) usb2 at uhci2: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub2 at usb2 uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04) uhci3: interrupting at ioapic0 pin 16 (irq 5) usb3 at uhci3: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub3 at usb3 uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04) ehci0: interrupting at ioapic0 pin 23 (irq 3) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 usbd_get_string: getting lang failed, using 0 uhub4 at usb4 uhub4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4) pci4 at ppb3 bus 5 pci4: no spaces enabled! pcib0 at pci0 dev 31 function 0 pcib0: vendor 0x8086 product 0x2641 (rev. 0x04) piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at piixide0 channel 1 vendor 0x8086 product 0x266a (SMBus serial bus, revision 0x04) at pci0 dev 31 function 3 not configured isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff npx0: reported by CPUID; using exception 16 isapnp0: no ISA Plug 'n Play devices found timecounter: Timecounter "TSC" frequency 630105950 Hz quality 800 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 Kernelized RAIDframe activated md0: internal 5000 KB image area umass0 at uhub4 port 5 configuration 1 interface 0 umass0: ENE UB6225, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: fabricating a geometry sd0: 7680 MB, 7680 cyl, 64 head, 32 sec, 512 bytes/sect x 15728640 sectors vendor 0xeb1a product 0x2761, class 239/2, rev 2.00/8.21, addr 3, uhub4 port 8 not configured wd0 at atabus1 drive 0: wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 3815 MB, 7753 cyl, 16 head, 63 sec, 512 bytes/sect x 7815024 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) sd0: fabricating a geometry boot device: lii0 root on md0a dumps on md0b root file system type: ffs WARNING: clock gained 2 days WARNING: CHECK AND RESET THE DATE! warning: no /dev/console atl2_media_status atl2_mii_statchg atl2_media_status atl2_media_status atl2_media_status atl2_media_status atl2_media_status atl2_media_status atl2_media_status atl2_media_change atl2_init atl2_reset atl2_mii_statchg atl2_intr (5000800) atl2_mii_statchg atl2_intr (5000800) atl2_mii_statchg atl2_init atl2_reset atl2_mii_statchg atl2_start atl2_start: put 0 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 0 atl2_start atl2_start atl2_start: put 1 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 1 atl2_start atl2_intr (5000800) atl2_mii_statchg atl2_intr (5000800) atl2_mii_statchg atl2_start atl2_start: put 2 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 2 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 0 (346) [1] read 346 bytes writing: 1 atl2_start atl2_start: put 3 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 3 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 1 (346) [1] read 692 bytes writing: 2 atl2_start atl2_start: put 4 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 4 atl2_start atl2_media_status atl2_media_status atl2_media_status atl2_media_status atl2_start atl2_start: put 5 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 5 atl2_start atl2_start atl2_start: put 6 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 6 atl2_start atl2_start atl2_start: put 7 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 7 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 2 (64) [1] read 756 bytes writing: 3 atl2_start atl2_start: put 8 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 8 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 3 (102) [1] read 858 bytes writing: 4 atl2_start atl2_start: put 9 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 9 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 4 (102) [1] read 960 bytes writing: 5 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 5 (64) [1] read 1024 bytes writing: 6 atl2_start atl2_start: put 10 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 10 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 6 (1070) [1] read 2094 bytes writing: 7 atl2_start atl2_start: put 11 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 11 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 7 (1070) [1] read 3164 bytes writing: 8 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 8 (1070) [1] read 4234 bytes writing: 9 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 9 (1070) [1] read 5304 bytes writing: 10 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 10 (64) [1] read 5368 bytes writing: 11 atl2_start atl2_start: put 12 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 12 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 11 (1070) [1] read 6438 bytes writing: 12 atl2_start atl2_start: put 13 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 13 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 12 (1070) [1] read 7508 bytes writing: 13 atl2_start atl2_start: put 14 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 14 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 13 (1070) [1] read 8578 bytes writing: 14 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 14 (1070) [1] read 9648 bytes writing: 15 atl2_start atl2_start: put 15 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 15 atl2_start atl2_init atl2_reset atl2_mii_statchg nd6_setmtu0: new link MTU on lii0 (256) is too small for IPv6 which needs 1280 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 0 (64) [3] read 9712 bytes writing: 1 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 1 (64) [3] read 9776 bytes writing: 2 atl2_start atl2_start: put 0 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 0 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 2 (64) [1] read 9840 bytes writing: 3 atl2_start atl2_start: put 1 atl2_intr (5010080) atl2_txintr atl2_txintr: ack'd 1 atl2_start atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 3 (64) [1] read 9904 bytes writing: 4 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 4 (96) [3] read 10000 bytes writing: 5 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 5 (96) [3] read 10096 bytes writing: 6 atl2_intr (5020000) atl2_rxintr atl2_rxintr: getting 6 (96) [3] read 10192 bytes writing: 7