INSTALL
TO INSTALL RUN:
                                                                                                                        
        perl Makefile.PL
        make
        make test
        make install
                                                                                                                        
If you would like to use the prebuilt Windows XP version,
you can find the most recent ppd file at:
http://www.conditor.com/Net-Bluetooth.ppd
                                                                                                                        
Usually to install the prebuilt Windows XP version you would run:
ppm install http://www.conditor.com/Net-Bluetooth.ppd

Once installed, run 'perldoc Net::Bluetooth' for more information.


If you are going to be using a Unix system, the Bluez libs can
be obtained at www.bluez.org. Please make sure these are installed
and working properly before you install the module. Depending on
your system BlueZ maybe already installed, or you may have to build
it yourself and do some configuration. You can verify BlueZ can detect
devices and services with the utilities that are included with it
(hciconfig, sdptool, hcitool, etc).
                                                                                                                       
If you are using Windows XP, please make sure you have Service Pack 2
installed and the Microsoft Platform SDK. Also please make sure the
"$win_include" variable at the top of Makfile.PL is set properly. This
needs to point to the SDK include directory for SP2. This is where the
module will look for all the Bluetooth header files (ws2bth.h, etc).
                                                                                                                       
Please check out the samples included in the samples directory for more
general information.

If you have any problems or questions please email me at IGuthrie@aol.com
with "Net::Bluetooth" in the subject line. If you run into a build problem,
please include the output of the install commands, the version of Perl
you are using (perl -v), and what operating system you are using.


Module Documentation: 

NAME

Net::Bluetooth - Perl Bluetooth Interface

SYNOPSIS


  use Net::Bluetooth;

  #### list all remote devices in the area
  my $device_ref = get_remote_devices();
  foreach $addr (keys %$device_ref) {
	print "Address: $addr Name: $device_ref->{$addr}\n";
  }


  #### search for a specific service (0x1101) on a remote device 
  my @sdp_array = sdp_search($addr, "1101", "");

  #### foreach service record
  foreach $rec_ref (@sdp_array) {
	#### Print all available information for service
	foreach $attr (keys %$rec_ref) {
		print "Attribute: $attr Value: $rec_ref->{$attr}\n";
	}
  }


  #### Create a RFCOMM client 
  $obj = Net::Bluetooth->newsocket("RFCOMM");
  die "socket error $!\n" unless(defined($obj));
  if($obj->connect($addr, $port) != 0) {
	die "connect error: $!\n";
  }

  #### create a Perl filehandle for reading and writing
  *SERVER = $obj->perlfh();
  $amount = read(SERVER, $buf, 256);
  close(SERVER);



  #### create a RFCOMM server
  $obj = Net::Bluetooth->newsocket("RFCOMM");
  #### bind to port 1
  if($obj->bind(1) != 0) {
	die "bind error: $!\n";
  }

  #### listen with a backlog of 2
  if($obj->listen(2) != 0) {
	die "listen error: $!\n";
  }

  #### register a service
  #### $obj must be a open and bound socket
  my $service_obj = Net::Bluetooth->newservice($obj, "1101", "GPS", "GPS Receiver");
  unless(defined($service_obj)) {
	#### couldn't register service
  }

  #### accept a client connection
  $client_obj = $obj->accept();
  unless(defined($client_obj)) {
	die "client accept failed: $!\n";
  }

  #### get client information
  my ($caddr, $port) = $client_obj->getpeername();

  #### create a Perl filehandle for reading and writing
  *CLIENT = $client_obj->perlfh();
  print CLIENT "stuff";

  #### close client connection
  close(CLIENT);
  #### stop advertising service
  $service_obj->stopservice();
  #### close server connection
  $obj->close();

DESCRIPTION

This module creates a Bluetooth interface for Perl.

Net::Bluetooth works with the BlueZ libs as well as with
Microsoft Windows.

If you are going to be using a Unix system, the Bluez libs can
be obtained at www.bluez.org. Please make sure these are installed
and working properly before you install the module. Depending on
your system BlueZ maybe already installed, or you may have to build
it yourself and do some configuration. You can verify that BlueZ can
detect devices and services with the utilities that are included with
it (hciconfig, sdptool, hcitool, etc).

If you are using Windows, please make sure you have Service Pack 2
installed and the Microsoft Platform SDK. Also please make sure the
"$win_include" variable at the top of Makfile.PL is set properly. This
needs to point to the SDK include directory for SP2. This is where the 
module will look for all the Bluetooth header files (ws2bth.h, etc).

Please check out the samples included in the samples directory for more
general information.


FUNCTIONS

get_remote_devices()
Searches for remote Bluetooth devices. The search will
take approximately 5 - 10 seconds (This will be a configurable 
value in the future.). When finished, it will return a hash
reference that contains the device address and name. The
address is the key and the name is the value. Name will be 
set to "[unknown]" if the name could not be resolved. See the
NOTES section of this document for more information about this.

sdp_search($addr, $uuid, $name) 
This searches a specific device for service records. The first
argument is the device address which is not optional. The uuid
argument can be a valid uuid or "0". The name argument can be a
valid service name or "". It will return services that match
the uuid or service name if supplied, otherwise it will return
all public service records for the device.

The return value is a list which contains a hash reference for
each service record found. The key/values for the hash are as follows:
SERVICE_NAME: Service Name
SERVICE_DESC: Service Description
SERVICE_PROV: Service Provider
RFCOMM: RFCOMM Port
L2CAP: L2CAP Port
UNKNOWN: Unknown Protocol  Port
If any of the values are unavailable, the keys will not exist.

If $addr is "localhost" the call will use the local SDP server. 


SOCKET OBJECT

The bluetooth socket object is used to create bluetooth sockets and
interface with them. There are two types of sockets supported, RFCOMM and
L2CAP. The methods are listed below.

newsocket("RFCOMM")
This constructs a socket object for a RFCOMM socket or L2CAP
socket.

connect($addr, $port)
This calls the connect() system call with the address and port you
supply. You can use this to connect to a server. Returns 0 on
success.

bind($port)
This calls the bind() system call with the port you provide. 
You can use this to bind to a port if you are creating a server.
Returns 0 on success. As a side note, RFCOMM ports can only range
from 1 - 31.

listen($backlog)
This calls the listen() system call with the backlog you provide.
Returns 0 on success.

accept()
This calls the accept() system call and creates a new bluetooth
socket object which is returned. On failure it will return undef.

perlfh()
This call returns a Perl filehandle for a open socket. You can
use the Perl filehandle as you would any other filehandle, except
with Perl functions that use the socket address structure. This 
provides a easy way to do socket IO instead of doing it through the
socket object. Currently this is the only way to do socket IO,
although soon I will provide read/write calls through the object
interface.

close()
This closes the socket object. This can also be done through the
Perl close() call on a created Perl filehandle.

getpeername()
This returns the address and name for a open bluetooth socket. (BlueZ only
for now)


SERVICE OBJECT

The service object allows you to register a service with your local
SDP server. The methods are as follows:

newservice($obj, $service_uuid, $service_name, $service_desc)
This registers a service with your local SDP server. The first
argument is a open and bound socket that you created with newsocket().
The second argument is the service uuid. The third argument is the
service name. The fourth argument is the service description.

The return value is a new service object. This will be undefined
if there was an error.

stop_service()
This unregisters your service with the local SDP server. The service 
will be unregistered without this call when the application exits.


NOTES

All uuids used with this module can either be 128 bit values:
"00000000-0000-0000-0000-000000000000" or 16 bit values: "0000". All values
must be represented as strings (enclosed in quotes), and must be hexadecimal
values.

Windows will not immediately return the device name if it is not already 
cached. Also there is no mechinism to alert the system when it has acquired
the device name. Therefore you may have to call get_remote_devices() twice
before the name shows up. I'll see if this can be handled better in the 
future.

Currently on Windows the service name and description returned by sdp_search()
are not setting their terminating NULL character properly. This can result in 
some garbage characters at the end of the string. I am looking at parsing
the raw record to fix this problem.

Some helpful resources are the O'Reilly book "Linux Unwired".
The BlueZ site www.bluez.org
Intro to Bluetooth programming:
http://people.csail.mit.edu/albert/bluez-intro/index.html

REQUIREMENTS

You need BlueZ or Microsoft Service Pack 2 and the Microsoft Platform SDK.
You will also need at least Perl 5.8.

AUTHOR

Ian Guthrie
IGuthrie@aol.com

Copyright (c) 2006 Ian Guthrie. All rights reserved.
               This program is free software; you can redistribute it and/or
               modify it under the same terms as Perl itself.

SEE ALSO

perl(1).