Date: 2-JUN-1987 12:13:17
From: SYSKERMIT%vax1.central.lancaster.ac.uk@Cs.Ucl.AC.UK
To: "SY.FDC" <@Cs.Ucl.AC.UK:SY.FDC@cu20b.columbia.edu>
Subject: Additional files for QL2 Kerit

  I've been sent the source for a small assembler routine to add to the QL2 
Kermit for Sinclair QL. It provides a support routine that apparently is not 
there in early versions of the BCPL compiler.

  The two files are below:

 FILE QL2QTRAP.MSG
 -----------------

Date: 29-MAY-1987 10:12:11
From: AJF@UK.AC.LANCS.PH.V1
To: SYSKERMIT@UK.AC.LANCS.VAX1
Subject: QL2 kermit support file for early BCP compilers

I have been asked to send you the following file which is the assembler 
code required to produce a routine called 'QTRAP' which is accessed by  
the BCPL version of kermit for the QL. This routine was not available on 
pre v2.0 of the Metacomco BCPL compiler. It is written for Metacomco's 
Macro Assembler, although any assembler should be able to cope with it.
The main routine 'KERMAIN' needs an additional global declared to tell 
it where to find QTRAP ( it must be in one of the system positions in 
V2.0 ) Please could you put it in the appropriate directory.

 Dr.A.J.Finch 27/5/87
  Physics Dept.,
   Lancaster University,
    Lancaster

(FILE QL2QTRAP.ASM is stored with QL2 Kermit as QL2QTR.ASM.)