Version: 1.00 Released: 25 December 1999 Also see: Kermit 95 for Windows, C-Kermit for Unix and VMS, Embedded Kermit
This page last updated: Fri Jan 3 11:53:42 2003
G-Kermit is a Unix program for transferring files with the Kermit protocol. G-Kermit is a product of the Kermit Project at Columbia University in New York city. It is free software under the GNU General Public License. See the COPYING file for details. Although G-Kermit was written for Unix, we are beginning to see ports of it to non-Unix platforms, so far including OS/2 and CP/M-68K.
This software is OSI Certified Open Source Software.
OSI Certified is a certification mark of the Open Source Initiative.
G-Kermit is:
Features include:
Kermit protocol features include:
Features selectable on command line:
Features not included (see Section 14):
$ stty crtscts
(where "$ " is the shell prompt) for RTS/CTS hardware flow control, or:
$ stty ixon ixoff
for Xon/Xoff "software" flow control. When you have a network connection, flow control is usually nothing to worry about, since the network protocol (TCP or X.25) takes care of it automatically, but on certain platforms (such as HP-UX) the TCP/IP Telnet or Rlogin server uses this for flow control between itself and the underlying pseudoterminal in which your session runs, so Xon/Xoff might be required for these sessions too.
The G-Kermit binary is called "gkermit". It should be stored someplace in your Unix PATH, such as /usr/local/bin/gkermit or somewhere in the /opt tree on System V R4. To run G-Kermit, just type "gkermit" followed by command-line options that tell it what to do. If no options are given, G-Kermit prints a usage message listing the available options:
G-Kermit CU-1.00, Columbia University, 1999-12-25: POSIX. Usage: gkermit [ options ] Options: -r Receive files -s fn Send files -g fn Get files from server -a fn As-name for single file -i Image (binary) mode transfer -T Text mode transfer -P Path/filename conversion disabled -w Write over existing files with same name -K Keep incompletely received files -p x Parity: x = o[dd],e[ven],m[ark],s[pace],n[one] -e n Receive packet-length (40-9000) -b n Timeout (sec, 0 = none) -x Force Xon/Xoff (--x = Don't force Xon/Xoff) -S Disable streaming -X External protocol -q Quiet (suppress messages) -d [fn] Debug to ./debug.log [or specified file] -h Help (this message) More info: http://www.columbia.edu/kermit/ <kermit@columbia.edu>
If an option takes an argument, the argument is required; if an option does not take an argument, no argument may be given (exceptions: -d may or may not take an argument; -s can take one or more arguments).
The action options are -r, -s, and -g. Only one action option may be given. If no action options are given, G-Kermit does nothing (except possibly printing its usage message or creating a debug.log file). Here are some examples (in which "$ " is the shell prompt):
$ gkermit -s hello.c Sends the hello.c file. $ gkermit -s hello.* Sends all hello.* files. $ gkermit -r Waits for you to send a file to it. $ gkermit -g hello.c Gets the hello.c file from your computer. $ gkermit -g \*.c Gets all *.c files from your computer.
Options that do not take arguments can be "bundled" with other options. An option that takes an argument must always be followed by a space and then its argument(s). Examples:
$ gkermit -is hello.o Sends hello.o in binary mode. $ gkermit -dSr Receives with debugging and no streaming.
G-Kermit's exit status is 0 if all operations succeeded and 1 if there were any failures. If a group of files was transferred, the exit status is 1 if one or more files were not successfully transferred and 0 if all of them were transferred successfully.
You may supply options to G-Kermit on the command line or through the GKERMIT environment variable, which can contain any valid gkermit command-line options. These are processed before the actual command-line options and so can be overridden by them. Example for bash or ksh, which you can put in your profile if you want to always keep incomplete files, suppress streaming, suppress messages, and use Space parity:
export GKERMIT="-K -S -q -p s"
G-Kermit's options are compatible with C-Kermit's, with the following exceptions:
-P (available only in C-Kermit 7.0 and later)
-K (currently not used in C-Kermit)
-b (used in C-Kermit for serial device speed)
-S (used in C-Kermit to force an interactive command prompt)
-x (used in C-Kermit to start server mode)
--x (currently not used in C-Kermit)
-X (currently not used in C-Kermit)
$ gkermit -Ts oofa.txt
it pauses for a second and then sends its first packet. What happens next depends on the capabilities of your terminal emulator:
During file transfer, most terminal emulators put up some kind of running display of the file transfer progress.
When G-Kermit is in packet mode and your terminal emulator is in its terminal screen, you can also type three (3) Ctrl-C characters in a row to make G-Kermit exit and restore the normal terminal modes.
When sending files in text mode, G-Kermit converts the record format to the common one that is defined for the Kermit protocol, namely lines terminated by carriage return and linefeed (CRLF); the receiver converts the CRLFs to whatever line-end or record-format convention is used on its platform. When receiving files in text mode, G-Kermit simply strips carriage returns, leaving only a linefeed at the end of each line, which is the Unix convention.
When receiving files, the sender's transfer mode (text or binary) predominates if the sender gives this information to G-Kermit in a Kermit File Attribute packet, which of course depends on whether your terminal emulator's Kermit protocol has this feature. Otherwise, if you gave a -i or -T option on the gkermit command line, the corresponding mode is used; otherwise the default mode (binary) is used.
Furthermore, when either sending or receiving, G-Kermit and your terminal emulator's Kermit can inform each other of their OS type (Unix in G-Kermit's case). If your emulator supports this capability, which is called "automatic peer recognition", and it tells G-Kermit that its platform is also Unix, G-Kermit and the emulator's Kermit automatically switch into binary mode, since no record-format conversion is necessary in this case. Automatic peer recognition is disabled automatically if you include the -i (image) or -T (text) option.
When sending, G-Kermit sends all files in the same mode, text or binary. There is no automatic per-file mode switching. When receiving, however, per-file switching occurs automatically based on the incoming Attribute packets, if any (explained below), that accompany each file, so if the file sender switches types between files, G-Kermit follows along.
G-Kermit uses the full pathname given to find and open the file, but then strips the pathname before sending the name to the receiver. For example:
$ gkermit -s /etc/hosts
results in an arriving file called "HOSTS" or "hosts" (the directory part, "/etc/", is stripped; see next section about capitalization). However, if a pathname is included in the -a option, the directory part is not stripped:
$ gkermit -s /etc/hosts -a /tmp/hosts
This example sends the /etc/hosts file but tells the receiver that its name is "/tmp/hosts". What the receiver does with the pathname is, of course, up to the receiver, which might have various options for dealing with incoming pathnames.
When RECEIVING a file, G-Kermit does NOT strip the pathname, since incoming files normally do not include a pathname unless you told your terminal to include them or gave an "as-name" including a path when sending to G-Kermit. If the incoming filename includes a path, G-Kermit tries to store the file in the specified place. If the path does not exist, the transfer fails. The incoming filename can, of course, be superseded with the -a option.
When receiving a file, if the name is all uppercase, G-Kermit converts it to all lowercase. If the name contains any lowercase letters, G-Kermit leaves the name alone. Otherwise G-Kermit accepts filename characters as they are, since Unix allows filenames to contain practically any characters.
If the automatic peer recognition feature is available in the terminal emulator, and G-Kermit recognizes the emulator's platform as Unix, G-Kermit automatically disables filename conversion and sends and accepts filenames literally.
You can force literal filenames by including the -P option on the command line.
To defeat the backup feature and have incoming files overwrite existing files of the same name, include the -w (writeover) option on the command line.
If G-Kermit has not been given the -w option and it fails to create a backup file, the transfer fails.
Using all defaults on a TCP/IP connection on 10BaseT (10Mbps) Ethernet from a modern Kermit program like C-Kermit 7.0 or Kermit 95, typical transfer rates are 150-1000Kcps, depending on the speed of the two computers and the network load.
When receiving files in text mode, G-Kermit strips all carriage returns, even if they aren't part of a CRLF pair.
If you have a TCP/IP connection (e.g. Telnet or Rlogin) to Unix from a terminal emulator whose Kermit protocol does not support streaming, downloads from G-Kermit are likely to be as much as 10 or even 100 times slower than uploads if the TCP/IP stack engages in Nagle or Delayed ACK heuristics; typically, when your terminal emulator's Kermit protocol sends an acknowledgment, the TCP stack holds on to it for (say) 1/5 second before sending it, because it is "too small" to send right away.
As noted in Section 9, the backup prefix is not guaranteed to be the highest number. For example, if you have files oofa.txt, oofa.txt.~1~, and oofa.txt.~3~ in your directory, and a new oofa.txt file arrives, the old oofa.txt is backed up to oofa.txt.~2~, rather than oofa.txt.~4~ as you might expect. This is because gkermit lacks directory reading capabilities, for reasons noted in Section 14, and without this, finding the highest existing backup number for a file is impractical.
If you send a file to G-Kermit with streaming active when the connection is not truly reliable, all bets are off. A fatal error should occur promptly, but if huge amounts of data are lost, G-Kermit might never recognize a single data packet and therefore not diagnose a single error; yet your terminal emulator keeps sending packets since no acknowledgments are expected; the transfer eventually hangs at the end of file. Use -S on G-Kermit's command line to disable streaming in situations where the terminal emulator requests it in error.
You can use G-Kermit's debug log for troubleshooting; this is useful mainly in conjunction with the source code. But even if you aren't a C programmer, it should reveal any problem in enough detail to help pinpoint the cause of the failure. "gkermit -d" (with no action options) writes a short debug.log file that shows the build options and settings.
The debug log is also a packet log; to extract the packets from it, use:
grep ^PKT debug.log
Packets in the log are truncated to avoid wrap-around on your screen, and they have the Ctrl-A packet-start converted to ^ and A to avoid triggering a spurious autodownload when displaying the log on your screen.
In certain circumstances it is not desirable or possible to use -d to create a log file called debug.log in the current directory; for example, if you don't have write access to the current directory, or you already have a debug.log file that you want to keep (or transfer). In this case, you can include a filename argument after -d:
gkermit -d /tmp/testing.log -s *.c
(This is an exception to the rule that option arguments are not optional.)
If all else fails, you can contact the Kermit Project for technical support; see:
http://www.columbia.edu/kermit/support
for instructions.
The source files are:
makefile The build procedure gwart.c Source code for a mini-lex substitute gproto.w G-Kermit protocol state machine to be preprocessed by gwart gkermit.h G-Kermit header file gkermit.c G-Kermit main module and routines gcmdline.c G-Kermit command-line parser gunixio.c Unix-specific i/o routines
A simple makefile is provided, which can be used with make or gmake. There are three main targets in the makefile:
Note that the target names are all lowercase; "posix" is the default target (the one used if you just type "make"). If the build fails with a message like:
gunixio.c: 65: Can't find include file termios.h *** Error code 1
then try "make sysv" or "make bsd". See the build list below for examples.
Some special build targets are also provided:
Several maintenance/management targets are also included:
[g]make CC=gcc [target]
No other tools beyond make, the C compiler and linker, a short list of invariant header files, and the standard C library are needed or used. The resulting binary should be 100K or less on all hardware platforms (and 64K or less on most; see list below).
You may also specify certain build options by including a KFLAGS clause on the make command line, e.g.:
make "KFLAGS=-DSETXONXOFF -DEXTRADEBUG" sysv
By default, nonblocking buffered read() is used for packets; this technique works on most platforms but other options -- USE_GETCHAR and DUMBIO -- are provided when it doesn't work or when nonblocking i/o is not available.
The build options include:
The coding conventions are aimed at maximum portability. For example:
Here are some sample builds:
Platform Size Target Notes Apple Mac OS X 1.0 gcc: 48K posix (AKA Rhapsody 5.5) AT&T 3B2/300 SVR2 cc: 52K sysv (4) AT&T 6300 PLUS cc: 61K sysv (6) AT&T 7300 UNIX PC cc: 43K sysv AT&T 7300 UNIX PC gcc: 58K sysv (25K with shared lib) BSDI 4.0.1 gcc: 34K posix DEC 5000 MIPS Ultrix 4.3 cc: 104K posix DEC Alpha Digital UNIX 3.2 cc: 98K bsd (AKA OSF/1) (1) DEC Alpha Tru64 UNIX 4.0e cc: 82K bsd (1) DEC PDP-11 2.11BSD cc: 40K bsd211 (7) DEC PDP-11 Ultrix 3.0 cc: 40K bsd211 (9) DEC VAX 4.3BSD cc: 46K bsd DEC VAX Ultrix 3.0 cc: 43K bsd DG/UX 5.4R4.11 gcc: 51K posix DYNIX/ptx 4.4.2 cc: 43K posix FreeBSD 3.3 gcc: 34K posix GNU/Linux RH 5.2 gcc: 35K posix (RH = Red Hat) GNU/Linux SW 3.5 gcc: 34K posix (SW = Slackware) HP-UX 5.21 cc: 55K sysv (2) HP-UX 6.5 cc: 40K sysv (5) HP-UX 7.05 cc: 50K posix HP-UX 8.00 gcc: 33K posix HP-UX 9.05 cc: 57K posix HP-UX 10.01 cc: 57K posix HP-UX 10.20 cc: 61K posix IBM AIX 2.2.1 RT PC IBM cc: 62K sysv IBM AIX 3.2 IBM cc: 62K posix IBM AIX 4.1.3 IBM cc: 67K posix Intergraph Clipper acc: 80K sysv (8) Motorola 68K SV/68 R3.6 cc: 58K sysv (4) Motorola 88K SV/88 R4.3 cc: 45K posix NetBSD 1.4.1 gcc: 41K posix NeXTSTEP m68k 3.1 gcc: 77K bsd (3) OPENSTEP m68k 4.2 gcc: 77K bsd (3) OpenBSD 2.5 gcc: 47K posix QNX 4.25 cc: 33K posix SCO XENIX 2.3.4 cc: 41K sysv (4) SCO UNIX 3.2v4.2 cc: 73K posix SCO UNIX 3.2v4.2 gcc: 61K posix SCO ODT 3.0 cc: 97K posix SCO OSR5.0.5 gcc: 42K posix SCO Unixware 2.1.3 cc: 38K posix SGI IRIX 5.3 cc: 86K posix SGI IRIX 6.5.4 cc: 91K posix SINIX 5.42 MIPS cc: 57K posix Solaris 2.4 cc: 50K posix Solaris 7 cc: 52K posix SunOS 4.1.3 cc: 57K posix SunOS 4.1.3 gcc: 64K posix
Notes:
DO NOT give SETUID or SETGID privilege to G-Kermit. G-Kermit is not a dialout program. It does not access serial devices or UUCP lockfiles, and it does not do real/effective ID switching. If you give it SETUID or SETGID privilege, this will open restricted files and directories to users who otherwise do not have access, and incoming files will be created with the wrong owner and/or group.
The executable should be called "gkermit" and not "kermit", since "kermit" is the binary name for C-Kermit, and the two are likely to be installed side by side on the same computer; even when they are not, consistent naming is better for support and sanity purposes. There is also a short man page:
gkermit.nr
You can view it with:
nroff -man gkermit.nr | more
Rename and store it appropriately so users can access it with 'man gkermit'. In addition, the README should be made available in a public documentation directory as:
gkermit.txt
The makefile includes a sample 'install' target that does all this. Please read it before use to be sure the appropriate directories and permissions are indicated. There is also an 'uninstall' target to undo an installation. Obviously you need write access to the relevant directories before you can install or uninstall G-Kermit.
Other features are omitted to keep the program small and simple, and to avoid creeping featurism:
All of the above can be found in C-Kermit, which is therefore bigger and more complicated, with more platform-specific code and #ifdef spaghetti. C-Kermit requires constant updates and patches to keep pace with changes in the underlying platforms, networking and security methods, and demands from its users for more features.
The goal for G-Kermit, on the other hand, is simplicity and stability, so we don't need thousands of #ifdefs like we have in C-Kermit, and we don't need to tweak the code every time a new release of each Unix variety comes out. G-Kermit is meant to be PORTABLE and LONG-LASTING so the stress is on a MINIMUM of platform dependencies.
If you make changes, please try to avoid adding anything platform-dependent or in any other way destabilizing. Bear in mind that the result of your changes should still build and run successfully on at least all the platforms where G-Kermit was built originally. In any case, you are encouraged to send any changes back to the Kermit Project to be considered for addition to the master G-Kermit distribution.
http://www.columbia.edu/kermit The Kermit Project website http://www.gnu.org The GNU Project website comp.protocols.kermit.misc The unmoderated Kermit newsgroup The ANNOUNCE file G-Kermit announcements kermit-support@columbia.edu Kermit technical support
Please read http://www.columbia.edu/kermit/support.html before sending e-mail to the tech support address.
The AIX version is a self-extracting ZIP archive that produces a bff file that can be installed with smit.
Source-code archives are listed just below. If you have a C compiler, you should download the source archive, uncompress if it was compressed or gunzip if it was gzipped, unpack the tar archive with "tar xf gku100.tar", and then build from source code as explained in Section 12. If you don't have a C compiler, download the appropriate prebuilt binary, rename it to "gkermit", and give it execute permission ("chmod +x gkermit"). See Section 13 for installation instructions.
Filename Descriptiongku100.tar.gz G-Kermit source tar archive, gzipped (62K) gku100.tar.Z G-Kermit source tar archive, compressed (90K) gku100.tar G-Kermit source tar archive, not compressed (212K) gku100.zip G-Kermit source ZIP archive (81K) gkermit68k.tar.gz G-Kermit sources, binaries, docs for CP/M-68K (117K) kermit/g/ Individual source and doc files (text)
Individual binaries are also available for those who need them (contact us if you can make any that are not listed):
Filename Descriptiongku100.alpha-osf1-1.3 DEC Alpha with OSF/1 1.3 gku100.alpha-du-3.2 DEC Alpha with Digital UNIX 3.2 gku100.alpha-du-3.2c DEC Alpha with Digital UNIX 3.2C gku100.alpha-du-3.2d DEC Alpha with Digital UNIX 3.2D gku100.alpha-du-3.2g DEC Alpha with Digital UNIX 3.2G gku100.alpha-du-4.0b DEC Alpha with Digital UNIX 4.0B gku100.alpha-du-4.0c DEC Alpha with Digital UNIX 4.0C gku100.alpha-du-4.0d DEC Alpha with Digital UNIX 4.0D gku100.alpha-tru64-4.0e DEC Alpha with Tru64 UNIX 4.0E gku100.alpha-tru64-4.0f DEC Alpha with Tru64 UNIX 4.0F gku100.alpha-tru64-5.0a DEC Alpha with Tru64 UNIX 5.0A gku100.alpha-tru64-5.1 DEC Alpha with Tru64 UNIX 5.1 gku100.alpha-tru64-5.1a DEC Alpha with Tru64 UNIX 5.1A gku100.alpha-freebsd-3.4 DEC Alpha with FreeBSD 3.4 gku100.alpha-freebsd-4.4 DEC Alpha with FreeBSD 4.4 gku100.alpha-freebsd-4.5 DEC Alpha with FreeBSD 4.5 gku100.alpha-freebsd-4.6 DEC Alpha with FreeBSD 4.6 gku100.alpha-freebsd-4.7 DEC Alpha with FreeBSD 4.7 gku100.alpha-linux-db2.2 DEC Alpha with Linux Debian 2.2 gku100.alpha-linux-db3.0 DEC Alpha with Linux Debian 3.0 gku100.alpha-linux-rh5.2 DEC Alpha with Linux Red Hat 5.2 gku100.alpha-linux-rh6.1 DEC Alpha with Linux Red Hat 6.1 gku100.alpha-linux-rh6.2 DEC Alpha with Linux Red Hat 6.2 gku100.alpha-linux-rh7.1 DEC Alpha with Linux Red Hat 7.1 gku100.alpha-linux-su6.1 DEC Alpha with Linux SuSE 6.1 gku100.alpha-linux-su6.3 DEC Alpha with Linux SuSE 6.3 gku100.alpha-linux-su6.4 DEC Alpha with Linux SuSE 6.4 gku100.alpha-linux-su7.1 DEC Alpha with Linux SuSE 7.1 gku100.alpha-netbsd-1.4 DEC Alpha with NetBSD 1.4 gku100.alpha-netbsd-1.5.1 DEC Alpha with NetBSD 1.5.1 gku100.alpha-netbsd-1.5.2 DEC Alpha with NetBSD 1.5.2 gku100.alpha-netbsd-1.6 DEC Alpha with NetBSD 1.6 gku100.armv41-linux-ipaq-db2.1 Compaq iPAQ H3650 Debian 2.1 gku100.armv41-linux-shark-db2.1 Compaq SA-110 Shark Palmtop gku100.armv41-linux-zaurus-sl550 Sharp Zaurus SL5500 Palmtop gku100.att3b2-sysv-3.1 AT&T 3B2/200 with System V R3.1 gku100.att7300-sysv-3.51 AT&T 7300 UNIX PC (3B1) with System V R3.51 gku100.clipper-clix-3.1 Intergraph InterPro 2020 with CLIX 3.1V7.6.27 gku100.hp9000s300-netbsd-1.3.1 HP 9000 Model 300 with NetBSD 1.3.1 gku100.hp9000s500-hpux-5.21 HP 9000 Model 550 with HP-UX 5.21 gku100.hp9000s300-hpux-6.5 HP 9000 Model 3xx with HP-UX 6.5 gku100.hp9000s300-hpux-7.05 HP 9000 Model 3xx with HP-UX 7.05 gku100.hp9000s300-hpux-8.00 HP 9000 Model 3xx with HP-UX 8.00 gku100.hp9000s400-hpux-8.00 HP 9000 Model 4xx with HP-UX 8.00 gku100.hp9000s300-hpux-9.03 HP 9000 Model 3xx with HP-UX 9.03 gku100.hp9000s700-hpux-9.05 HP 9000 Model 7xx with HP-UX 9.05 gku100.hp9000s700-hpux-9.07 HP 9000 Model 7xx with HP-UX 9.07 gku100.hp9000s300-hpux-9.10 HP 9000 Model 3xx with HP-UX 9.10 gku100.hp9000s700-hpux-10.01 HP 9000 Model 7xx with HP-UX 10.01 gku100.hp9000s700-hpux-10.20 HP 9000 Model 7xx with HP-UX 10.20 gku100.hp9000s800-hpux-10.20 HP 9000 Model 8xx with HP-UX 10.20 gku100.hp9000s700-hpux-11.00 HP 9000 Model 7xx with HP-UX 11.00 gku100.hp9000s800-hpux-11.00 HP 9000 Model 8xx with HP-UX 11.00 gku100.hp9000s700-hpux-11.11 HP 9000 Model 7xx with HP-UX 11.11 gku100.hp9000s800-hpux-11.11 HP 9000 Model 8xx with HP-UX 11.11 gku100.i386-aix-1.2.1 PC (PS/2) with AIX 1.2.1 gku100.i386-beos-4.5 PC with BeOS 4.5 gku100.i386-bsdi-4.0.1 PC with BSDI/OS 4.0.1 gku100.i386-bsdi-4.1 PC with BSDI/OS 4.1 gku100.i386-bsdi-4.2 PC with BSDI/OS 4.2 gku100.i386-bsdi-4.3 PC with BSDI/OS 4.3 gku100.i386-coherent-4.2 PC with Mark Williams Coherent 4.2 gku100.i386-dgux54420 PC with DG/UX 5.4R4.20 gku100.i386-dynixptx-4.4.2 PC with Sequent DYNIX/ptx 4.4.2 gku100.i386-freebsd-1.0 PC with FreeBSD 1.0 gku100.i386-freebsd-2.2.7 PC with FreeBSD 2.2.7 gku100.i386-freebsd-2.2.8 PC with FreeBSD 2.2.8 gku100.i386-freebsd-3.1 PC with FreeBSD 3.1 gku100.i386-freebsd-3.3 PC with FreeBSD 3.3 gku100.i386-freebsd-3.4 PC with FreeBSD 3.4 gku100.i386-freebsd-4.0 PC with FreeBSD 4.0 gku100.i386-freebsd-4.2 PC with FreeBSD 4.2 gku100.i386-freebsd-4.3 PC with FreeBSD 4.3 gku100.i386-freebsd-4.4 PC with FreeBSD 4.4 gku100.i386-freebsd-4.5 PC with FreeBSD 4.5 gku100.i386-freebsd-4.6 PC with FreeBSD 4.6 gku100.i386-freebsd-4.7 PC with FreeBSD 4.7 gku100.i386-is5r3-4.1.1 PC with Interactive UNIX System V/386 R3.2 R4.1.1 gku100.i386-linux-ca3.1 PC with Caldera GNU/Linux 3.1 gku100.i386-linux-db2.1 PC with Debian GNU/Linux 2.1 gku100.i386-linux-db2.2 PC with Debian GNU/Linux 2.2 gku100.i386-linux-db3.0 PC with Debian GNU/Linux 3.0 gku100.i386-linux-md9.0 PC with Mandrake GNU/Linux 9.0 gku100.i386-linux-rh5.1 PC with Red Hat GNU/Linux 5.1 gku100.i386-linux-rh5.2 PC with Red Hat GNU/Linux 5.2 gku100.i386-linux-rh6.1 PC with Red Hat GNU/Linux 6.1 gku100.i386-linux-rh6.2 PC with Red Hat GNU/Linux 6.2 gku100.i386-linux-rh7.0 PC with Red Hat GNU/Linux 7.0 gku100.i386-linux-rh7.1 PC with Red Hat GNU/Linux 7.1 gku100.i386-linux-rh7.2 PC with Red Hat GNU/Linux 7.2 gku100.i386-linux-rh8.0 PC with Red Hat GNU/Linux 8.0 gku100.i386-linux-ra2.1 PC with Red Hat Advanced Server 2.1 gku100.i386-linux-su5.3 PC with SuSE GNU/Linux 5.3 gku100.i386-linux-su6.1 PC with SuSE GNU/Linux 6.1 gku100.i386-linux-su6.2 PC with SuSE GNU/Linux 6.2 gku100.i386-linux-su6.3 PC with SuSE GNU/Linux 6.3 gku100.i386-linux-su6.4 PC with SuSE GNU/Linux 6.4 gku100.i386-linux-su7.0 PC with SuSE GNU/Linux 7.0 gku100.i386-linux-su7.3 PC with SuSE GNU/Linux 7.3 gku100.i386-linux-sw3.4 PC with Slackware GNU/Linux 3.4 gku100.i386-linux-sw3.5 PC with Slackware GNU/Linux 3.5 gku100.i386-linux-sw4.0 PC with Slackware GNU/Linux 4.0 gku100.i386-linux-sw7.0 PC with Slackware GNU/Linux 7.0 gku100.i386-linux-sw8.0 PC with Slackware GNU/Linux 8.0 gku100.i386-linux-tu6.5 PC with TurboLinux 6.5 gku100.i386-linux-tu7.0 PC with TurboLinux 7.0 gku100.i386-minix-2.0.2 PC with Minix 2.0.2 (32-bit) gku100.i386-mpras-2.03 PC with NCR MP-RAS 2.03 gku100.i386-mpras-3.02 PC with NCR MP-RAS 3.02 gku100.i386-netbsd-1.4p PC with NetBSD 1.4P (ELF) gku100.i386-netbsd-1.4.1 PC with NetBSD 1.4.1 gku100.i386-netbsd-1.5.2 PC with NetBSD 1.5.2 gku100.i386-netbsd-1.5.4 PC with NetBSD 1.5.4 gku100.i386-netbsd-1.6 PC with NetBSD 1.6 gku100.i386-openbsd-2.5 PC with OpenBSD 2.5 gku100.i386-openbsd-2.9 PC with OpenBSD 2.9 gku100.i386-openbsd-3.0 PC with OpenBSD 3.0 gku100.i386-openbsd-3.1 PC with OpenBSD 3.1 gku100.i386-os2-3.0 PC with IBM OS/2 3.0 and EMX 0.9c gku100.i386-plan9 PC with Plan 9 from Bell Labs gku100.i286-qnx-4.25 PC with QNX 4.x (16 bit) gku100.i386-qnx-4.25 PC with QNX 4.25 (32 bit) gku100.i386-qnxnto-2 PC with QNX Neutrino 2+ gku100.i386-qnx-6.1 PC with QNX 6.1 gku100.i386-scoxenix-2.3.4 PC with SCO XENIX 2.3.4 gku100.i386-scounix-3.2v4.2 PC with SCO UNIX 3.2v4.2 gku100.i386-scoodt-3.0 PC with SCO ODT 3.0 gku100.i386-scoosr5-5.0.2 PC with SCO OSR5.0.2 gku100.i386-scoosr5-5.0.4 PC with SCO OSR5.0.4 gku100.i386-scoosr5-5.0.5 PC with SCO OSR5.0.5 gku100.i386-scoosr5-5.0.6 PC with SCO OSR5.0.6 gku100.i386-scoou8-8.0.0 PC with SCO Open Unix 8.0.0 gku100.i386-scoou8-8.0.1 PC with SCO Open Unix 8.0.1 gku100.i386-sinix-5.41 PC with Siemens Nixdorf SINIX-L 5.41 gku100.i386-solaris-2.5.1 PC with Solaris 2.5.1 gku100.i386-solaris-2.6 PC with Solaris 2.6 gku100.i386-solaris-8 PC with Solaris 8 gku100.i386-unixware-2.1.0 PC with UnixWare 2.1.0 gku100.i386-unixware-2.1.3 PC with UnixWare 2.1.3 gku100.i386-unixware-7.0.1 PC with UnixWare 7.0.1 gku100.i386-unixware-7.1.0 PC with UnixWare 7.1.0 gku100.i386-unixware-7.1.1 PC with UnixWare 7.1.1 gku100.i386-unixware-7.1.3 PC with UnixWare 7.1.3 gku100.ia64-hpux-11.22 IA64 (Itanium) with HP-UX 11i 11.22 gku100.ia64-linux-db3.0 IA64 (Itanium) with Debian Linux 3.0 gku100.ia64-linux-rh7.1 IA64 (Itanium) with Red Hat Linux 7.1 gku100.ia64-linux-rh7.2 IA64 (Itanium) with Red Hat Linux 7.2 gku100.ia64-linux-su7.2 IA64 (Itanium) with SuSE Linux 7.2 gku100.m68k-linux-db2.1 Motorola 680x0 with Linux Debian 2.1 gku100.m68k-linux-db2.2 Motorola 680x0 with Linux Debian 2.2 gku100.m68k-netbsd-1.4.2a Motorola 680x0 with NetBSD 1.4.2-Alpha gku100.m68k-cpm68k-1.2 Motorola 68020 with CP/M-68K 1.2 (rename to gkermit.rel) gku100.m68k-sv68-r3.6 Motorola MVME 147 68K, System V/68 R3V6 gku100.mvme68k-netbsd-1.5.2 Motorola MVME 147 or 167 m68k, NetBSD 1.5.2 gku100.m68k-nextstep-3.1 NeXTstation with NeXTSTEP 3.1 gku100.m68k-nextstep-3.3 NeXTstation with NeXTSTEP 3.3 gku100.m68k-openstep-4.2 NeXTstation with OPENSTEP 4.2 gku100.m68k-tandy6000-xenix-3.0 Tandy 16/6000 Microsoft XENIX 3.02.00 gku100.m88k-dgux-5.4r3.10 Data General AViiON 88110 with DG/UX 5.4R3.10 gku100.m88k-dgux-5.4r4.11 Data General AViiON 88110 with DG/UX 5.4R4.11 gku100.m88k-sv88-r4.3 Motorola MVME 187 88K, System V R4 V4.3 gku100.m88k-sv88-r4.4 Motorola MVME 187 88K, System V R4 V4.4 gku100.mips-irix-5.3 SGI with IRIX 5.3 (MIPS-1) gku100.mips-irix-6.2 SGI with IRIX 6.2 (MIPS-2) gku100.mips-irix-6.3 SGI with IRIX 6.3 (MIPS-2) gku100.mips-irix-6.2-n32 SGI with IRIX 6.2 (MIPS-3) gku100.mips-irix-6.2-64 SGI with IRIX 6.2 (64-bit) gku100.mips-irix-6.5.2 SGI with IRIX 6.5.2 gku100.mips-irix-6.5.4 SGI with IRIX 6.5.4 gku100.mips-irix-6.5.6 SGI with IRIX 6.5.6 gku100.mips-irix-6.5.10 SGI with IRIX 6.5.10 gku100.mips-sinix-5.42 Siemens Nixdorf RM200 with SINIX 5.42 gku100.mips-reliant-5.43 Siemens Nixdorf RM600 with Reliant UNIX 5.43 gku100.mips-reliant-5.44 Siemens Nixdorf RM600 with Reliant UNIX 5.44 gku100.mips-linux-db3.0 DECstation 5000 with Debian Linux 3.0 gku100.mips-netbsd-1.4.1 DECstation 5000 with NetBSD 1.4.1 gku100.mips-ultrix-4.3 DECstation 5000 with Ultrix 4.3 gku100.mips-ultrix-4.3a DECstation 5000 with Ultrix 4.3A gku100.pdp11-bsd-2.11 DEC PDP-11/44(?) with 2.11BSD gku100.pdp11-ultrix11-3.0 DEC PDP-11/23+ with Ultrix-11 3.0 (no I&D) gku100.vax-bsd-4.2 DEC VAX with 4.2BSD gku100.vax-bsd-4.3 DEC VAX with 4.3BSD gku100.vax-ultrix-3.0 DEC VAX with Ultrix 3.0 gku100.vax-ultrix-4.5 DEC VAX with Ultrix 4.5 gku100.parisc-ftx-3.4 Stratus Continuum (PA-RISC), FTX 3.4 gku100.ppc-linux-db2.2 Apple Power Mac with Linux Debian 2.2 gku100.ppc-linuxppc-1999q2 Apple Power Mac with LinuxPPC 1999 Q2 gku100.ppc-linuxppc-2000q4 Apple Power Mac with LinuxPPC 2000 Q4 gku100.ppc-linux-su6.3 Apple Power Mac with Linux SuSE 6.3 gku100.ppc-linux-su6.4 Apple Power Mac with Linux SuSE 6.4 gku100.ppc-macosx-1.0 Apple Power Mac with Mac OS X 1.0 (Rhapsody 5.5) gku100.ppc-macosx-10.1.1 Apple Power Mac with Mac OS X 10.1.1 gku100.ppc-darwin-1.3.3 Apple Power Mac with Apple Darwin 1.3.3 gku100.ppc-darwin-5.3 Apple Power Mac with Apple Darwin 5.3 gku100.ppc-macosx-10.2 Apple Power Mac with Mac OS X 10.2 gku100.ppc-beos-4.5 BeBox, BeOS 4.5 gku100.ppc-powermax-5.1 Concurrent PowerMAX OS 5.1 gku100.rtpc-aix-2.2.1 IBM RT PC, AIX 2.2.1 gku100.rtpc-aos-4.3 IBM RT PC, AOS 4.3BSD gku100.rs6000-aix-3.2.0 IBM Power Series with AIX 3.2.0 gku100.rs6000-aix-3.2.5 IBM Power Series with AIX 3.2.5 gku100.ppc-aix-4.1.3 IBM Power Series with AIX 4.1.3 gku100.ppc-aix-4.1.5 IBM Power Series with AIX 4.1.5 gku100.ppc-aix-4.2.1 IBM Power Series with AIX 4.2.1 gku100.ppc-aix-4.3.2 IBM Power Series with AIX 4.3.2 gku100.ppc-aix-4.3.3 IBM Power Series with AIX 4.3.3 gku100.ppc-aix-5.1 IBM Power Series with AIX 5.1 gku100.pyramid-dcosx-1.1 Pyramid MIS-ES6/1024 SMP DC-OSx1.1-95c087.4 gku100.s390-linux390 IBM System/390 with Linux/390 gku100.s390-linux-su7.0 IBM System/390 with SuSE Linux 7.0 gku100.sun3-sunos-4.1.1 Sun/3 with SunOS 4.1.1 gku100.sparc-linux-db2.2 Sun Sparc with Linux Debian 2.2 gku100.sparc-linux-rh6.1 Sun Sparc with Linux Red Hat 6.1 gku100.sparc-linux-rh6.2 Sun Sparc with Linux Red Hat 6.2 gku100.sparc-linux-su7.1 Sun Sparc with Linux SuSE Linux 7.1 gku100.sparc-netbsd-1.4.1 Sun Sparc with NetBSD 1.4.1 gku100.sparc-openbsd-2.3 Sun Sparc with OpenBSD 2.3 gku100.sparc-sunos-4.1.1 Sun Sparc with SunOS 4.1.1 gku100.sparc-sunos-4.1.3 Sun Sparc with SunOS 4.1.3 gku100.sparc-solaris-1.0.1 Sun (Tadpole) SparcBook2 with Solaris 1.0.1 gku100.sparc-solaris-2.4 Sun Sparc with Solaris 2.4 gku100.sparc-solaris-2.5.1 Sun Sparc with Solaris 2.5.1 gku100.sparc-solaris-2.6 Sun Sparc with Solaris 2.6 gku100.sparc-solaris-7 Sun Sparc with Solaris 7 gku100.sparc-solaris-8 Sun Sparc with Solaris 8 gku100.sparc-solaris-9 Sun Sparc with Solaris 9
$ mv gku100.att7300-sysv-3.51 gkermit $ compress gkermit $ uuencode gkermit.Z gkermit.Z > gkermit.Z.uue
This gives a 35K text file having 573 lines. Now use a terminal emulator such as C-Kermit, Kermit 95, or MS-DOS Kermit to make a connection to Computer B, for example by modem or direct serial connection, log in, and then give the commands to enable the appropriate kind of flow control (RTS/CTS or Xon/Xoff) on your login terminal. Then use your terminal emulator (which is set to the same kind of flow control) to "transmit" (other terminal emulators might say "upload with ASCII protocol") the gku100.uue file to Computer B, which has been given a command like:
$ cat > gkermit.Z.uue
When the upload is finished, type Ctrl-D to Computer B to close the new file and return to the shell prompt, and then:
$ uudecode gkermit.Z.uue $ uncompress gkermit.Z $ chmod +x gkermit
Now you have a file transfer program on computer B. Of course this bootstrapping method is error prone since "ASCII" is not an error-correcting protocol, so you might have to try several times, perhaps reducing your serial speed. But once gkermit is successfully installed on Computer B, you can use it to transfer files into and out of Computer B to/from any computer that has a Kermit program and that can make a connection to Computer B. You can also use gkermit to receive the larger C-Kermit, which then gives Computer B dialout and scripting capabilities.
For those who need to bootstrap G-Kermit from a non-UNIX platform, each G-Kermit binary has been compressed and uuencoded for you. In fact, there is a dot-Z version (compressed with UNIX 'compress') and a dot-gz version (compressed with GNU gzip), for example:
gku100.i386-scoxenix-2.3.4.Z.uue (compress: 34K, 550 lines) gku100.i386-scoxenix-2.3.4.gz.uue (gzip: 25K, 408 lines)
The names correspond to those in the binaries list, but with ".Z.uue" added for compressed versions and ".gz.uue" added for gzip'd versions. CLICK HERE for FTP access.
[ Top ] [ Kermit Home ]