Kermit Software for the PDP-8, PDP-12, and DECmate

Photo

Digital Equipment Corporation's PDP-11 was (and is) a 16-bit mini- and microcomputer system used in applications ranging from embedded device control to general-purpose timesharing. Several different Kermit programs are available for the PDP-11.

Kermit-11 is the Kermit software for Digital Equipment Corporation PDP-11 operating systems: RT-11, RSX-11, RSTS/E, IAS, P/OS, and (not a DEC OS) TSX+. Kermit-11 was written by Brian Nelson of the University of Toledo, Ohio, circa 1984-89, in PDP-11 assembly language, Macro-11. Separate programs, listed below, are available for other PDP-11 operating systems like UNIX and MUMPS.

The Kermit-11 source code as well as prebuilt binaries for various configurations are available at our ftp site in the kermit/b subdirectory as k11*.mac. There are also various utilities -- hex encoders and decoders, etc -- written Macro-11, Fortran, and Basic in the same directory, along with all the Kermit-11 text files, whose names all start with "k11".

Kermit-11 can operate in either remote or local mode; that is, it can transfer files when it is on the far end, and it can make connections and enter terminal mode (and transfer files) when it is on the "near end".

The documentation for Kermit-11 is based on Brian's last release (please note that the ".doc" extension was used for plain-text documentation files since long before Microsoft existed, so if your Browser thinks it's some kind of rich-text document that needs a helper application to read it, tell it to just load it directly as plain text, no helper needed).

Installation instructions are also available:

There are separate versions of Kermit-11 for each DEC OS, plus distinct Kermit programs for other PDP-11 operating systems. Originally all the Kermit-11 programs were all built from a common code base. After Brian moved on, some of the Kermit-11 versions took on separate identities that, we hope, will someday be brought back into alignment. The PDP-11 Kermit programs are:
RSX-11, RSX-11/M, RSX-11/M+, Micro/RSX, IAS, and P/OS
Brian's last release, 3.60 from June 1989, is still current for RSX and its cousins. RSX-11/M 4.1, RSX-11/M+ 2.1, P/OS 2.0 or IAS 3.1 or later is required in most cases. This version has some bugs that prevent successful transfers with more modern Kermits, which can usually be worked around by telling one or both Kermit programs to "set attributes off".

RT-11, Pro/RT, and TSX+
A new version, 3.62, for the RT-11 family only, was produced by Billy Youdelman in September 1993 and includes lots of bug fixes and enhancements. Version 3.63 was released 27 September 1997. RT-11 4.0, TSX-Plus 5.0, or Pro/RT 5.1 or later are required. All of the source files are in the kermit/b area as krt*.*. The krt.doc file contains complete installation instructions for RT-11 and TSX-Plus.

RSTS/E
The RSTS version was further developed by John Santos in 1996, based on Billy's version, and a test edition of John's improved RSTS version is available. RSTS/E 8.0 or later is required. The source files are in the kermit/test/pdp11/ area as krt*.*.

2.8, 2.9, 2.10, and 2.11 BSD
The 2.xBSD versions are covered by G-Kermit 1.00 and C-Kermit 6.0 rather than Kermit-11. (C-Kermit 7.0 or later, even in a minimal configuration, is too large for the PDP-11 address space.)

Ultrix-11
G-Kermit is available for Ultrix-11 3.0.

VENIX 1.0 and 2.0
C-Kermit 4.x was buildable for VENIX on the Pro/350 and 380. Versions 5A and later were never tested there, but the C-Kermit makefile still contains the appropriate entries.

Bell UNIX V6 and V7
G-Kermit can probably be built for UNIX V6 or V7, but so far we have no reports about it.

MUMPS
A version of Kermit for the MUMPS-11 PDP-11 operating system can also be found at the Kermit archive. It is totally separate from Kermit-11 and C-Kermit. It was written in MUMPS-82 at the New York State College of Veterinary Medicine in 1984 and can be found in the kermit/b area as mp*.*, with documentation in the plain-text mpker.doc file. Nothing has been heard about this version since 1984, when it was submitted; It is completely unsupported. Reports would be welcome.

Others for which no Kermit programs are known to exist
It is a goal of the Kermit Project to unify the divergent Kermit-11 versions, bringing the RSX version up to date in the process but this will require some volunteer effort by PDP-11 aficionados, and no promises can be made.

Kermit-11 File Organization

As noted, all the text files, including source code, documentation, utilities, and so on, are in the kermit/b directory of the Kermit software archive, all sharing the filename prefix "k11". The newer RT/TSX version is in the same directory, but with prefix "krt". The RSTS/E test version is in kermit/test/pdp11. Binaries are in kermit/bin/ and kermit/test/pdp11/bin/.

Binary Executables

Here they are. More detailed descriptions can be found in the installation instructions.
k11.tsk
Kermit-11 3.60 for RSTS/E 8.0 or later, linked to RMSRES
k11id.tsk
As above but with I&D space
k11nrs.tsk
RSTS, but not linked with RMSRES
krtid.tsk
A test 3.62 version for RSTS, requires I&D space
k11idm.tsk
Kermit-11 3.60 for RSX11M+ or Micro/RSX with I&D Space
k11pos.tsk
Kermit-11 3.60 For RSX11M+, Micro/RSX, or P/OS. Reportedly, this one might also work on RSX 3.x.
k11rsx.tsk
Kermit-11 3.60 for RSX, not linked with RMSRES
k11sml.tsk
Kermit-11 3.60 RSX11M, small executable, tightly overlaid
k11i31.tsk
Kermit-11 3.60 for IAS 3.1
k11ias.tsk
Kermit-11 3.60 for IAS
k11xm.sav
Kermit-11 3.60 for RT-11XM and TSX+.
k11rt4.sav
Kermit-11 3.60 for RT-11FB and TSX+.
krt.sav
Kermit-11 3.63 for RT-11FB/SB/SJ and TSX+.
krtmin.sav
Kermit-11 3.62 for RT-11FB/SB/SJ minimal version
krttsx.sav
Kermit-11 3.63 for RT-11XB/XM/ZB/ZM and TSX+.

Bootstrapping

How to get Kermit-11 onto your PDP-11 if it doesn't already have Kermit or FTP, and nobody can send you a binary on the required media? The precise answer depends on your PDP-11 operating system (RT, RSTS, RSX, etc), but basically involves "capturing" a copy of the appropriate "hexified" binary (next section) onto your PDP-11 disk, as well as a copy of the dehexifying program, and then running the latter on the former.

For example in RT-11 get the following files in text mode:

And then read the instructions are at the top of the krthex.mac file.

Hexified (text) Binaries

These are "hex" encoded (i.e. printable text) versions of the executable programs. They are useful if you don't have any way to get binary files onto your PDP-11. Hex files can be "bootstrapped" as indicated in the previous section, or sent by email, etc.
k11.hex
Corresponds to k11.tsk.
k11i31.hex
Corresponds to k11i31.tsk.
k11nrs.hex
Corresponds to k11nrs.tsk.
k11pos.hex
Corresponds to k11pos.tsk.
k11rsx.hex
Corresponds to k11rsx.tsk.
k11rt4.hex
Corresponds to k11rt4.sav.
k11xm.hex
Corresponds to k11xm.sav.
krt.hex
Corresponds to krt.sav.
krtmin.hex
Corresponds to krtmin.sav.
krttsx.hex
Corresponds to krttsx.sav.
Native Media

Native media -- RX01, RX50, RK05, DECtape, who knows what else -- might be available from the DECUS library, 219 Boston Post Road, BP02, Marlboro, MA 01752-1850. Write, or call (800) 332-8755, or send Internet e-mail to decuslibrary@decus.org for further info.

The Kermit Project has no PDP-11s in house to make PDP-11-specific formats. We can make ANSI-format 9-track tapes, which are supported by some PDP-11 OSs, and we can make VMS BACKUP format TK50s as well more common non-DEC formats like DOS diskettes, etc (but not RX50s).

When you can't get PDP-11 Kermit on native media, you probably can still bootstrap the appropriate hexified binary onto your PDP-11, along with the dehexifying program, and then use the latter to decode the former. See the Binaries section above.

Additional Information

Note: .HLP and .DOC are original 1960s and -70s DEC filetypes. If your browser insists on treatming them as Windows Help or Microsoft Word documents, your browser lacks a sense of history.

Offsite links:

[ Kermit Project Home ]

Kermit for the PDP-11 / Columbia University / kermit@columbia.edu / 4 August 2001