/* $NetBSD: locore.S,v 1.198 2024/07/31 20:05:28 andvar Exp $ */ /* * Copyright-o-rama! */ /* * Copyright (c) 1998, 2000, 2004, 2006, 2007, 2009, 2016 * The NetBSD Foundation, Inc., All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum, by Andrew Doran and by Maxime Villard. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 2006 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * Copyright (c) 2001 Wasabi Systems, Inc. * All rights reserved. * * Written by Frank van der Linden for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)locore.s 7.3 (Berkeley) 5/13/91 */ #include __KERNEL_RCSID(0, "$NetBSD: locore.S,v 1.198 2024/07/31 20:05:28 andvar Exp $"); #include "opt_copy_symtab.h" #include "opt_ddb.h" #include "opt_modular.h" #include "opt_multiboot.h" #include "opt_realmem.h" #include "opt_xen.h" #include "assym.h" #include "lapic.h" #include "ioapic.h" #include "ksyms.h" #include #include #include #include #include #include #include #include #include #ifndef XENPV #include #endif /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */ #include #ifndef XENPV #define _RELOC(x) ((x) - KERNBASE) #else #define _RELOC(x) ((x)) #endif /* XENPV */ #define RELOC(x) _RELOC(_C_LABEL(x)) /* 32bit version of PTE_NX */ #define PTE_NX32 0x80000000 #ifndef PAE #define PROC0_PDIR_OFF 0 #else #define PROC0_L3_OFF 0 #define PROC0_PDIR_OFF 1 * PAGE_SIZE #endif #define PROC0_STK_OFF (PROC0_PDIR_OFF + PDP_SIZE * PAGE_SIZE) #define PROC0_PTP1_OFF (PROC0_STK_OFF + UPAGES * PAGE_SIZE) /* * fillkpt - Fill in a kernel page table * eax = pte (page frame | control | status) * ebx = page table address * ecx = number of pages to map * * For PAE, each entry is 8 bytes long: we must set the 4 upper bytes to 0. * This is done by the first instruction of fillkpt. In the non-PAE case, this * instruction just clears the page table entry. */ #define fillkpt \ cmpl $0,%ecx ; /* zero-sized? */ \ je 2f ; \ 1: movl $0,(PDE_SIZE-4)(%ebx) ; /* upper 32 bits: 0 */ \ movl %eax,(%ebx) ; /* store phys addr */ \ addl $PDE_SIZE,%ebx ; /* next PTE/PDE */ \ addl $PAGE_SIZE,%eax ; /* next phys page */ \ loop 1b ; \ 2: ; /* * fillkpt_nox - Same as fillkpt, but sets the NX/XD bit. */ #define fillkpt_nox \ cmpl $0,%ecx ; /* zero-sized? */ \ je 2f ; \ pushl %ebp ; \ movl RELOC(nox_flag),%ebp ; \ 1: movl %ebp,(PDE_SIZE-4)(%ebx) ; /* upper 32 bits: NX */ \ movl %eax,(%ebx) ; /* store phys addr */ \ addl $PDE_SIZE,%ebx ; /* next PTE/PDE */ \ addl $PAGE_SIZE,%eax ; /* next phys page */ \ loop 1b ; \ popl %ebp ; \ 2: ; /* * fillkpt_blank - Fill in a kernel page table with blank entries * ebx = page table address * ecx = number of pages to map */ #define fillkpt_blank \ cmpl $0,%ecx ; /* zero-sized? */ \ je 2f ; \ 1: movl $0,(PDE_SIZE-4)(%ebx) ; /* upper 32 bits: 0 */ \ movl $0,(%ebx) ; /* lower 32 bits: 0 */ \ addl $PDE_SIZE,%ebx ; /* next PTE/PDE */ \ loop 1b ; \ 2: ; /* * killkpt - Destroy a kernel page table * ebx = page table address * ecx = number of pages to destroy */ #define killkpt \ 1: movl $0,(PDE_SIZE-4)(%ebx) ; /* upper bits (for PAE) */ \ movl $0,(%ebx) ; \ addl $PDE_SIZE,%ebx ; \ loop 1b ; #ifdef XEN #define __ASSEMBLY__ #include #include #define ELFNOTE(name, type, desctype, descdata...) \ .pushsection .note.name ; \ .align 4 ; \ .long 2f - 1f /* namesz */ ; \ .long 4f - 3f /* descsz */ ; \ .long type ; \ 1:.asciz #name ; \ 2:.align 4 ; \ 3:desctype descdata ; \ 4:.align 4 ; \ .popsection /* * Xen guest identifier and loader selection */ .section __xen_guest ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz, "NetBSD") ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz, "4.99") ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION, .asciz, "xen-3.0") ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE, .long, KERNBASE) #ifdef XENPV ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET, .long, KERNBASE) ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long, start) #else ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET, .long, 0) ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY, .long, RELOC(start_xenpvh)) #endif /* XENPV */ ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long, hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, .long, HYPERVISOR_VIRT_START) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz, "writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel|hvm_callback_vector") ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz, "yes") ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, .quad, PTE_P, PTE_P)\ ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz, "generic") ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long, 0) #if NKSYMS > 0 || defined(DDB) || defined(MODULAR) ELFNOTE(Xen, XEN_ELFNOTE_BSD_SYMTAB, .asciz, "yes") #endif #endif /* XEN */ /* * Initialization */ .data .globl _C_LABEL(tablesize) .globl _C_LABEL(nox_flag) .globl _C_LABEL(cputype) .globl _C_LABEL(cpuid_level) .globl _C_LABEL(esym) .globl _C_LABEL(eblob) .globl _C_LABEL(atdevbase) .globl _C_LABEL(PDPpaddr) .globl _C_LABEL(lwp0uarea) .globl _C_LABEL(gdt) .globl _C_LABEL(idt) .type _C_LABEL(tablesize), @object _C_LABEL(tablesize): .long 0 END(tablesize) .type _C_LABEL(nox_flag), @object LABEL(nox_flag) .long 0 /* 32bit NOX flag, set if supported */ END(nox_flag) .type _C_LABEL(cputype), @object LABEL(cputype) .long 0 /* are we 80486, Pentium, or.. */ END(cputype) .type _C_LABEL(cpuid_level), @object LABEL(cpuid_level) .long -1 /* max. level accepted by cpuid instr */ END(cpuid_level) .type _C_LABEL(atdevbase), @object LABEL(atdevbase) .long 0 /* location of start of iomem in virt */ END(atdevbase) .type _C_LABEL(lwp0uarea), @object LABEL(lwp0uarea) .long 0 END(lwp0uarea) .type _C_LABEL(PDPpaddr), @object LABEL(PDPpaddr) .long 0 /* paddr of PDP, for libkvm */ END(PDPpaddr) /* Space for the temporary stack */ .globl _C_LABEL(tmpstk) .size tmpstk, tmpstk - . .space 512 tmpstk: #ifdef XENPV .align PAGE_SIZE, 0x0 /* Align on page boundary */ LABEL(tmpgdt) .space PAGE_SIZE /* Xen expects a page */ END(tmpgdt) #endif /* XENPV */ .text .globl _C_LABEL(kernel_text) .set _C_LABEL(kernel_text),KERNTEXTOFF ENTRY(start) #ifndef XENPV /* Warm boot */ movw $0x1234,0x472 #if defined(MULTIBOOT) jmp 1f .align 4 .globl Multiboot_Header _C_LABEL(Multiboot_Header): #define MULTIBOOT_HEADER_FLAGS (MULTIBOOT_HEADER_WANT_MEMORY) .long MULTIBOOT_HEADER_MAGIC .long MULTIBOOT_HEADER_FLAGS .long -(MULTIBOOT_HEADER_MAGIC + MULTIBOOT_HEADER_FLAGS) .align 8 .globl Multiboot2_Header _C_LABEL(Multiboot2_Header): .long MULTIBOOT2_HEADER_MAGIC .long MULTIBOOT2_ARCHITECTURE_I386 .long Multiboot2_Header_end - Multiboot2_Header .long -(MULTIBOOT2_HEADER_MAGIC + MULTIBOOT2_ARCHITECTURE_I386 \ + (Multiboot2_Header_end - Multiboot2_Header)) .long 1 /* MULTIBOOT_HEADER_TAG_INFORMATION_REQUEST */ .long 12 /* sizeof(multiboot_header_tag_information_request) */ /* + sizeof(uint32_t) * requests */ .long 4 /* MULTIBOOT_TAG_TYPE_BASIC_MEMINFO */ .long 0 /* pad for 8 bytes alignment */ .long 8 /* MULTIBOOT_HEADER_TAG_ENTRY_ADDRESS_EFI32 */ .long 12 /* sizeof(struct multiboot_tag_efi32) */ .long efi_multiboot2_loader - KERNBASE .long 0 /* pad for 8 bytes alignment */ #if notyet /* * Could be used to get an early console for debug, * but this is broken. */ .long 7 /* MULTIBOOT_HEADER_TAG_EFI_BS */ .long 8 /* sizeof(struct multiboot_tag) */ #endif .long 0 /* MULTIBOOT_HEADER_TAG_END */ .long 8 /* sizeof(struct multiboot_tag) */ .globl Multiboot2_Header_end _C_LABEL(Multiboot2_Header_end): 1: /* Check if we are being executed by a Multiboot-compliant boot * loader. */ cmpl $MULTIBOOT_INFO_MAGIC,%eax je multiboot1_loader cmpl $MULTIBOOT2_BOOTLOADER_MAGIC,%eax je multiboot2_loader jmp 1f multiboot1_loader: /* * Indeed, a multiboot-compliant boot loader executed us. We switch * to the temporary stack, and copy the received Multiboot information * structure into kernel's data space to process it later -- after we * are relocated. It will be safer to run complex C code than doing it * at this point. */ movl $_RELOC(tmpstk),%esp pushl %ebx /* Address of Multiboot information */ call _C_LABEL(multiboot1_pre_reloc) addl $4,%esp jmp .Lstart_common efi_multiboot2_loader: /* * EFI32 multiboot2 entry point. We are left here without * stack and with no idea of where we were loaded in memory. * The only inputs are * %eax MULTIBOOT2_BOOTLOADER_MAGIC * %ebx pointer to multiboot_info * * Here we will copy the kernel to 0x100000 (KERNTEXTOFF - KERNBASE) * as almost all the code in locore.S assume it is there. Once done, * we join the main start code .This is derived from * src/sys/arch/i386/stand/efiboot/bootia32/startprog32.S */ cli /* * Discover our load address and store it in %edx */ movl $_RELOC(tmpstk),%esp call next next: popl %edx subl $(next - efi_multiboot2_loader), %edx /* * Save multiboot_info for later. We cannot use * temporary stack for that since we are going to * overwrite it. */ movl %ebx, (multiboot2_info_ptr - efi_multiboot2_loader)(%edx) /* * Get relocated multiboot2_loader entry point in %ebx */ movl $(KERNTEXTOFF - KERNBASE), %ebx addl $(multiboot2_loader - start), %ebx /* Copy kernel */ movl $(KERNTEXTOFF - KERNBASE), %edi /* dest */ movl %edx, %esi subl $(efi_multiboot2_loader - start), %esi /* src */ movl $(__kernel_end - kernel_text), %ecx /* size */ #if defined(NO_OVERLAP) movl %ecx, %eax #else movl %edi, %eax subl %esi, %eax cmpl %ecx, %eax /* overlapping? */ movl %ecx, %eax jb .Lbackwards #endif /* nope, copy forwards. */ shrl $2, %ecx /* copy by words */ rep movsl and $3, %eax /* any bytes left? */ jnz .Ltrailing jmp .Lcopy_done .Ltrailing: cmp $2, %eax jb 11f movw (%esi), %ax movw %ax, (%edi) je .Lcopy_done movb 2(%esi), %al movb %al, 2(%edi) jmp .Lcopy_done 11: movb (%esi), %al movb %al, (%edi) jmp .Lcopy_done #if !defined(NO_OVERLAP) .Lbackwards: addl %ecx, %edi /* copy backwards. */ addl %ecx, %esi and $3, %eax /* any fractional bytes? */ jnz .Lback_align .Lback_aligned: shrl $2, %ecx subl $4, %esi subl $4, %edi std rep movsl cld jmp .Lcopy_done .Lback_align: sub %eax, %esi sub %eax, %edi cmp $2, %eax jb 11f je 12f movb 2(%esi), %al movb %al, 2(%edi) 12: movw (%esi), %ax movw %ax, (%edi) jmp .Lback_aligned 11: movb (%esi), %al movb %al, (%edi) jmp .Lback_aligned #endif /* End of copy kernel */ .Lcopy_done: cld /* LynxOS depends on it */ /* Prepare jump address */ lea (efi_multiboot2_loader32a - efi_multiboot2_loader)(%edx), %eax movl %eax, (efi_multiboot2_loader32r - efi_multiboot2_loader)(%edx) /* Setup GDT */ lea (gdt - efi_multiboot2_loader)(%edx), %eax movl %eax, (gdtrr - efi_multiboot2_loader)(%edx) lgdt (gdtr - efi_multiboot2_loader)(%edx) /* Jump to set %cs */ ljmp *(efi_multiboot2_loader32r - efi_multiboot2_loader)(%edx) .align 4 efi_multiboot2_loader32a: movl $0x10, %eax /* #define DATA_SEGMENT 0x10 */ movw %ax, %ds movw %ax, %es movw %ax, %fs movw %ax, %gs movw %ax, %ss /* Already set new stack pointer */ movl %esp, %ebp /* Disable Paging in CR0 */ movl %cr0, %eax andl $(~CR0_PG), %eax movl %eax, %cr0 /* Disable PAE in CR4 */ movl %cr4, %eax andl $(~CR4_PAE), %eax movl %eax, %cr4 jmp efi_multiboot2_loader32b .align 4 efi_multiboot2_loader32b: xor %eax, %eax movl %ebx, (efi_multiboot2_loader32r - efi_multiboot2_loader)(%edx) /* * Reload multiboot info from target location */ movl _RELOC(multiboot2_info_ptr), %ebx ljmp *(efi_multiboot2_loader32r - efi_multiboot2_loader)(%edx) .align 16 efi_multiboot2_loader32r: .long 0 .long 0x08 /* #define CODE_SEGMENT 0x08 */ .align 16 gdt: .long 0, 0 .byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x9f, 0xcf, 0x00 .byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x93, 0xcf, 0x00 gdtr: .word gdtr - gdt gdtrr: .quad 0 multiboot2_info_ptr: .long 0 .align 16 multiboot2_loader: movl $_RELOC(tmpstk),%esp pushl %ebx /* Address of Multiboot information */ call _C_LABEL(multiboot2_pre_reloc) addl $4,%esp jmp .Lstart_common #endif /* MULTIBOOT */ 1: /* * At this point, we know that a NetBSD-specific boot loader * booted this kernel. * * Load parameters from the stack (32 bits): * boothowto, [bootdev], bootinfo, esym, biosextmem, biosbasemem * We are not interested in 'bootdev'. */ addl $4,%esp /* Discard return address to boot loader */ call _C_LABEL(native_loader) addl $24,%esp .Lstart_common: /* First, reset the PSL. */ pushl $PSL_MBO popfl /* Clear segment registers; always null in proc0. */ xorl %eax,%eax movw %ax,%fs movw %ax,%gs /* Find out our CPU type. */ try386: /* Try to toggle alignment check flag; does not exist on 386. */ pushfl popl %eax movl %eax,%ecx orl $PSL_AC,%eax pushl %eax popfl pushfl popl %eax xorl %ecx,%eax andl $PSL_AC,%eax pushl %ecx popfl testl %eax,%eax jnz try486 /* * Try the test of a NexGen CPU -- ZF will not change on a DIV * instruction on a NexGen, it will on an i386. Documented in * Nx586 Processor Recognition Application Note, NexGen, Inc. */ movl $0x5555,%eax xorl %edx,%edx movl $2,%ecx divl %ecx jnz is386 isnx586: /* * Don't try cpuid, as Nx586s reportedly don't support the * PSL_ID bit. */ movl $CPU_NX586,RELOC(cputype) jmp 2f is386: movl $CPU_386,RELOC(cputype) jmp 2f try486: /* Try to toggle identification flag; does not exist on early 486s. */ pushfl popl %eax movl %eax,%ecx xorl $PSL_ID,%eax pushl %eax popfl pushfl popl %eax xorl %ecx,%eax andl $PSL_ID,%eax pushl %ecx popfl testl %eax,%eax jnz try586 is486: movl $CPU_486,RELOC(cputype) /* * Check Cyrix CPU * Cyrix CPUs do not change the undefined flags following * execution of the divide instruction which divides 5 by 2. * * Note: CPUID is enabled on M2, so it passes another way. */ pushfl movl $0x5555, %eax xorl %edx, %edx movl $2, %ecx clc divl %ecx jnc trycyrix486 popfl jmp 2f trycyrix486: movl $CPU_6x86,RELOC(cputype) /* set CPU type */ /* * Check for Cyrix 486 CPU by seeing if the flags change during a * divide. This is documented in the Cx486SLC/e SMM Programmer's * Guide. */ xorl %edx,%edx cmpl %edx,%edx /* set flags to known state */ pushfl popl %ecx /* store flags in ecx */ movl $-1,%eax movl $4,%ebx divl %ebx /* do a long division */ pushfl popl %eax xorl %ecx,%eax /* are the flags different? */ testl $0x8d5,%eax /* only check C|PF|AF|Z|N|V */ jne 2f /* yes; must be Cyrix 6x86 CPU */ movl $CPU_486DLC,RELOC(cputype) /* set CPU type */ #ifndef CYRIX_CACHE_WORKS /* Disable caching of the ISA hole only. */ invd movb $CCR0,%al /* Configuration Register index (CCR0) */ outb %al,$0x22 inb $0x23,%al orb $(CCR0_NC1|CCR0_BARB),%al movb %al,%ah movb $CCR0,%al outb %al,$0x22 movb %ah,%al outb %al,$0x23 invd #else /* CYRIX_CACHE_WORKS */ /* Set cache parameters */ invd /* Start with guaranteed clean cache */ movb $CCR0,%al /* Configuration Register index (CCR0) */ outb %al,$0x22 inb $0x23,%al andb $~CCR0_NC0,%al #ifndef CYRIX_CACHE_REALLY_WORKS orb $(CCR0_NC1|CCR0_BARB),%al #else orb $CCR0_NC1,%al #endif movb %al,%ah movb $CCR0,%al outb %al,$0x22 movb %ah,%al outb %al,$0x23 /* clear non-cacheable region 1 */ movb $(NCR1+2),%al outb %al,$0x22 movb $NCR_SIZE_0K,%al outb %al,$0x23 /* clear non-cacheable region 2 */ movb $(NCR2+2),%al outb %al,$0x22 movb $NCR_SIZE_0K,%al outb %al,$0x23 /* clear non-cacheable region 3 */ movb $(NCR3+2),%al outb %al,$0x22 movb $NCR_SIZE_0K,%al outb %al,$0x23 /* clear non-cacheable region 4 */ movb $(NCR4+2),%al outb %al,$0x22 movb $NCR_SIZE_0K,%al outb %al,$0x23 /* enable caching in CR0 */ movl %cr0,%eax andl $~(CR0_CD|CR0_NW),%eax movl %eax,%cr0 invd #endif /* CYRIX_CACHE_WORKS */ jmp 2f try586: /* Use the `cpuid' instruction. */ xorl %eax,%eax cpuid movl %eax,RELOC(cpuid_level) /* * Retrieve the NX/XD flag. We use the 32bit version of PTE_NX. */ movl $0x80000001,%eax cpuid andl $CPUID_NOX,%edx jz no_NOX movl $PTE_NX32,RELOC(nox_flag) no_NOX: 2: /* * Finished with old stack; load new %esp now instead of later so we * can trace this code without having to worry about the trace trap * clobbering the memory test or the zeroing of the bss+bootstrap page * tables. * * The boot program should check: * text+data <= &stack_variable - more_space_for_stack * text+data+bss+pad+space_for_page_tables <= end_of_memory * * XXX: the gdt is in the carcass of the boot program so clearing * the rest of memory is still not possible. */ movl $_RELOC(tmpstk),%esp /* * There are two different layouts possible, depending on whether PAE is * enabled or not. * * If PAE is not enabled, there are two levels of pages: PD -> PT. They will * be referred to as: L2 -> L1. L2 is 1 page long. The BOOTSTRAP TABLES have * the following layout: * +-----+------------+----+ * | L2 -> PROC0 STK -> L1 | * +-----+------------+----+ * * If PAE is enabled, there are three levels of pages: PDP -> PD -> PT. They * will be referred to as: L3 -> L2 -> L1. L3 is 1 page long, L2 is 4 page * long. The BOOTSTRAP TABLES have the following layout: * +-----+-----+------------+----+ * | L3 -> L2 -> PROC0 STK -> L1 | * +-----+-----+------------+----+ * * Virtual address space of the kernel in both cases: * +------+--------+------+-----+--------+---------------------+----------- * | TEXT | RODATA | DATA | BSS | [SYMS] | [PRELOADED MODULES] | BOOTSTRAP * +------+--------+------+-----+--------+---------------------+----------- * (1) (2) (3) * * -------+-------------+ * TABLES | ISA I/O MEM | * -------+-------------+ * (4) * * PROC0 STK is obviously not linked as a page level. It just happens to be * caught between L2 and L1. * * Important note: the kernel segments are properly 4k-aligned * (see kern.ldscript), so there's no need to enforce alignment. */ /* Find end of kernel image; brings us on (1). */ movl $RELOC(__kernel_end),%edi #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(makeoptions_COPY_SYMTAB) /* Save the symbols (if loaded); brings us on (2). */ movl RELOC(esym),%eax testl %eax,%eax jz 1f subl $KERNBASE,%eax movl %eax,%edi 1: #endif /* Skip over any modules/blobs; brings us on (3). */ movl RELOC(eblob),%eax testl %eax,%eax jz 1f subl $KERNBASE,%eax movl %eax,%edi 1: /* We are on (3). Align up for BOOTSTRAP TABLES. */ movl %edi,%esi addl $PGOFSET,%esi andl $~PGOFSET,%esi /* nkptp[1] = (esi + ~L2_FRAME) >> L2_SHIFT + 1; */ movl %esi,%eax addl $~L2_FRAME,%eax shrl $L2_SHIFT,%eax incl %eax /* one more PTP for VAs stolen by bootstrap */ 1: movl %eax,RELOC(nkptp)+1*4 /* tablesize = (PDP_SIZE + UPAGES + nkptp[1]) << PGSHIFT; */ addl $(PDP_SIZE+UPAGES),%eax #ifdef PAE incl %eax /* one more page for L3 */ shll $PGSHIFT+1,%eax /* PTP tables are twice larger with PAE */ #else shll $PGSHIFT,%eax #endif movl %eax,RELOC(tablesize) /* Ensure that nkptp[1] covers BOOTSTRAP TABLES, ie: * (esi + tablesize) >> L2_SHIFT + 1 < nkptp[1] */ addl %esi,%eax addl $~L2_FRAME,%eax shrl $L2_SHIFT,%eax incl %eax cmpl %eax,RELOC(nkptp)+1*4 jnz 1b /* Now, zero out the BOOTSTRAP TABLES (before filling them in). */ movl %esi,%edi xorl %eax,%eax cld movl RELOC(tablesize),%ecx shrl $2,%ecx rep stosl /* copy eax -> edi */ /* * Build the page tables and levels. We go from L1 to L2/L3, and link the levels * together. Note: RELOC computes &addr - KERNBASE in 32 bits; the value can't * be > 4G, or we can't deal with it anyway, since we are in 32bit mode. */ /* * Build L1. */ leal (PROC0_PTP1_OFF)(%esi),%ebx /* Skip the area below the kernel text. */ movl $(KERNTEXTOFF - KERNBASE),%ecx shrl $PGSHIFT,%ecx fillkpt_blank /* Map the kernel text RX. */ movl $(KERNTEXTOFF - KERNBASE),%eax /* start of TEXT */ movl $RELOC(__rodata_start),%ecx subl %eax,%ecx shrl $PGSHIFT,%ecx orl $(PTE_P),%eax fillkpt /* Map the kernel rodata R. */ movl $RELOC(__rodata_start),%eax movl $RELOC(__data_start),%ecx subl %eax,%ecx shrl $PGSHIFT,%ecx orl $(PTE_P),%eax fillkpt_nox /* Map the kernel data+bss RW. */ movl $RELOC(__data_start),%eax movl $RELOC(__kernel_end),%ecx subl %eax,%ecx shrl $PGSHIFT,%ecx orl $(PTE_P|PTE_W),%eax fillkpt_nox /* Map [SYMS]+[PRELOADED MODULES] RW. */ movl $RELOC(__kernel_end),%eax movl %esi,%ecx /* start of BOOTSTRAP TABLES */ subl %eax,%ecx shrl $PGSHIFT,%ecx orl $(PTE_P|PTE_W),%eax fillkpt_nox /* Map the BOOTSTRAP TABLES RW. */ movl %esi,%eax /* start of BOOTSTRAP TABLES */ movl RELOC(tablesize),%ecx /* length of BOOTSTRAP TABLES */ shrl $PGSHIFT,%ecx orl $(PTE_P|PTE_W),%eax fillkpt_nox /* We are on (4). Map ISA I/O MEM RW. */ movl $IOM_BEGIN,%eax movl $IOM_SIZE,%ecx /* size of ISA I/O MEM */ shrl $PGSHIFT,%ecx orl $(PTE_P|PTE_W/*|PTE_PCD*/),%eax fillkpt_nox /* * Build L2 for identity mapping. Linked to L1. */ leal (PROC0_PDIR_OFF)(%esi),%ebx leal (PROC0_PTP1_OFF)(%esi),%eax orl $(PTE_P|PTE_W),%eax movl RELOC(nkptp)+1*4,%ecx fillkpt /* Set up L2 entries for actual kernel mapping */ leal (PROC0_PDIR_OFF + L2_SLOT_KERNBASE * PDE_SIZE)(%esi),%ebx leal (PROC0_PTP1_OFF)(%esi),%eax orl $(PTE_P|PTE_W),%eax movl RELOC(nkptp)+1*4,%ecx fillkpt /* Install recursive top level PDE */ leal (PROC0_PDIR_OFF + PDIR_SLOT_PTE * PDE_SIZE)(%esi),%ebx leal (PROC0_PDIR_OFF)(%esi),%eax orl $(PTE_P|PTE_W),%eax movl $PDP_SIZE,%ecx fillkpt_nox #ifdef PAE /* * Build L3. Linked to L2. */ leal (PROC0_L3_OFF)(%esi),%ebx leal (PROC0_PDIR_OFF)(%esi),%eax orl $(PTE_P),%eax movl $PDP_SIZE,%ecx fillkpt /* Enable PAE mode */ movl %cr4,%eax orl $CR4_PAE,%eax movl %eax,%cr4 #endif /* Save physical address of L2. */ leal (PROC0_PDIR_OFF)(%esi),%eax movl %eax,RELOC(PDPpaddr) /* * Startup checklist: * 1. Load %cr3 with pointer to L2 (or L3 for PAE). */ movl %esi,%eax movl %eax,%cr3 /* * 2. Set NOX in EFER, if available. */ movl RELOC(nox_flag),%ebx cmpl $0,%ebx je skip_NOX movl $MSR_EFER,%ecx rdmsr xorl %eax,%eax orl $(EFER_NXE),%eax wrmsr skip_NOX: /* * 3. Enable paging and the rest of it. */ movl %cr0,%eax orl $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_MP|CR0_WP|CR0_AM),%eax movl %eax,%cr0 pushl $begin /* jump to high mem */ ret begin: /* * We have arrived. There's no need anymore for the identity mapping in * low memory, remove it. */ movl _C_LABEL(nkptp)+1*4,%ecx leal (PROC0_PDIR_OFF)(%esi),%ebx /* old, phys address of PDIR */ addl $(KERNBASE), %ebx /* new, virt address of PDIR */ killkpt /* Relocate atdevbase. */ movl $KERNBASE,%edx addl _C_LABEL(tablesize),%edx addl %esi,%edx movl %edx,_C_LABEL(atdevbase) /* Set up bootstrap stack. */ leal (PROC0_STK_OFF+KERNBASE)(%esi),%eax movl %eax,_C_LABEL(lwp0uarea) leal (USPACE-FRAMESIZE)(%eax),%esp movl %esi,PCB_CR3(%eax) /* pcb->pcb_cr3 */ xorl %ebp,%ebp /* mark end of frames */ #if defined(MULTIBOOT) /* It is now safe to parse the Multiboot information structure * we saved before from C code. Note that we cannot delay its * parsing any more because initgdt (called below) needs to make * use of this information. * We call both multiboot 1 and 2 flavors, they now if they * have something to do on their own. */ call _C_LABEL(multiboot1_post_reloc) call _C_LABEL(multiboot2_post_reloc) #endif /* * Initialize a temporary GDT (Global Descriptor Table) on the * stack and make the segment registers to use it. * * This creates a segment descriptor for the CPU-local segment * and loads %fs with its segment selector to set up addressing * for %fs. Thus, after this point, CPUVAR(...), curcpu(), and * curlwp will work. * * Later, we will replace this temporary GDT on the stack by a * permanent GDT allocated with uvm_km in gdt_init. * * XXX Intel recommends ensuring the GDT address is aligned on * an 8-byte boundary for performance. Perhaps not an issue * early at boot, but maybe worth doing? * * Intel 64 and IA-32 Architectures, Software Developer's * Manual, Volume 3: System Programming Guide, Order * Number 325383, April 2022, Sec. 3.5.1 `Segment * Descriptor Tables', p. 3-15: * * The base address of the GDT should be aligned * on an eight-byte boundary to yield the best * processor performance. */ subl $NGDT*8, %esp /* space for temporary gdt */ pushl %esp call _C_LABEL(initgdt) addl $4,%esp movl _C_LABEL(tablesize),%eax addl %esi,%eax /* skip past stack and page tables */ #ifdef PAE pushl $0 /* init386() expects a 64 bits paddr_t with PAE */ #endif pushl %eax #if defined(XEN) && !defined(XENPV) call _C_LABEL(init_xen_early) #endif call _C_LABEL(init_bootspace) call _C_LABEL(init386) addl $PDE_SIZE,%esp /* pop paddr_t */ addl $NGDT*8,%esp /* pop temporary gdt */ call _C_LABEL(main) #else /* XENPV */ /* First, reset the PSL. */ pushl $PSL_MBO popfl cld /* * Xen info: * - %esp -> stack, *theoretically* the last used page by Xen bootstrap */ movl %esp,%ebx movl $_RELOC(tmpstk),%esp /* Clear BSS. */ xorl %eax,%eax movl $RELOC(__bss_start),%edi movl $RELOC(_end),%ecx subl %edi,%ecx rep stosb /* Copy the necessary stuff from start_info structure. */ /* We need to copy shared_info early, so that sti/cli work */ movl $RELOC(start_info_union),%edi movl $(PAGE_SIZE / 4),%ecx rep movsl /* Clear segment registers. */ xorl %eax,%eax movw %ax,%fs movw %ax,%gs xorl %eax,%eax cpuid movl %eax,RELOC(cpuid_level) movl $VM_GUEST_XENPV, RELOC(vm_guest) /* * Use a temporary GDT page. We'll re-add it to uvm(9) once we're done * using it. */ movl $RELOC(tmpgdt),%eax pushl %eax /* start of temporary gdt */ call _C_LABEL(initgdt) addl $4,%esp call xen_locore /* * The first VA available is returned by xen_locore in %eax. We * use it as the UAREA, and set up the stack here. */ movl %eax,%esi movl %esi,_C_LABEL(lwp0uarea) leal (USPACE-FRAMESIZE)(%eax),%esp xorl %ebp,%ebp /* mark end of frames */ /* Set first_avail after the DUMMY PAGE (see xen_locore). */ addl $(USPACE+PAGE_SIZE),%esi subl $KERNBASE,%esi /* init386 wants a physical address */ pushl $0 /* init386() expects a 64 bits paddr_t with PAE */ pushl %esi call _C_LABEL(init_bootspace) call _C_LABEL(init386) addl $PDE_SIZE,%esp /* pop paddr_t */ call _C_LABEL(main) #endif /* XENPV */ END(start) #if defined(XEN) #ifndef XENPV /* entry point for Xen PVH */ ENTRY(start_xenpvh) /* Xen doesn't start us with a valid gdt */ movl $RELOC(gdtdesc_xenpvh), %eax lgdt (%eax) jmp $GSEL(GCODE_SEL, SEL_KPL), $RELOC(.Lreload_cs) .Lreload_cs: movw $GSEL(GDATA_SEL, SEL_KPL), %ax movw %ax, %ds movw %ax, %es movw %ax, %ss /* we need a valid stack */ movl $RELOC(tmpstk),%esp /* clear BSS */ xorl %eax,%eax movl $RELOC(__bss_start),%edi movl $RELOC(_end),%ecx subl %edi,%ecx rep stosb /* * save addr of the hvm_start_info structure. This is also the end * of the symbol table */ movl %ebx, RELOC(hvm_start_paddr) movl %ebx, %eax addl $KERNBASE,%eax movl $RELOC(esym),%ebp movl %eax,(%ebp) /* get a page for HYPERVISOR_shared_info */ addl $PAGE_SIZE, %ebx addl $PGOFSET,%ebx andl $~PGOFSET,%ebx movl $RELOC(HYPERVISOR_shared_info_pa),%ebp movl %ebx,(%ebp) /* XXX assume hvm_start_info+dependant structure fits in a single page */ addl $PAGE_SIZE, %ebx addl $PGOFSET,%ebx andl $~PGOFSET,%ebx addl $KERNBASE,%ebx movl $RELOC(eblob),%ebp movl %ebx,(%ebp) /* announce ourself */ movl $VM_GUEST_XENPVH, RELOC(vm_guest) jmp .Lstart_common END(start_xenpvh) .align 8 gdtdesc_xenpvh: .word gdt_xenpvhend - gdt_xenpvh .long RELOC(gdt_xenpvh) .word 0 gdt_xenpvh: .long 0 # null descriptor .long 0 .long 0x0000ffff # %cs .long 0x00cf9a00 .long 0x0000ffff # %ds, %es, %ss .long 0x00cf9200 gdt_xenpvhend: .align 4 #endif /* !XENPV */ /* space for the hypercall call page */ #define HYPERCALL_PAGE_OFFSET 0x1000 .align HYPERCALL_PAGE_OFFSET ENTRY(hypercall_page) /* Returns -1, on HYPERVISOR_xen_version() */ .skip (__HYPERVISOR_xen_version*32), 0x90 movl $-1, %eax retl .align HYPERCALL_PAGE_OFFSET, 0x90 END(hypercall_page) #ifdef XENPV /* * void lgdt_finish(void); * Finish load a new GDT pointer (do any necessary cleanup). * XXX It's somewhat questionable whether reloading all the segment registers * is necessary, since the actual descriptor data is not changed except by * process creation and exit, both of which clean up via task switches. OTOH, * this only happens at run time when the GDT is resized. */ /* LINTSTUB: Func: void lgdt_finish(void) */ ENTRY(lgdt_finish) movl $GSEL(GDATA_SEL, SEL_KPL),%eax movw %ax,%ds movw %ax,%es movw %ax,%gs movw %ax,%ss movl $GSEL(GCPU_SEL, SEL_KPL),%eax movw %ax,%fs /* Reload code selector by doing intersegment return. */ popl %eax pushl $GSEL(GCODE_SEL, SEL_KPL) pushl %eax lret END(lgdt_finish) #endif /* XENPV */ #endif /* XEN */ /* * void lwp_trampoline(void); * * This is a trampoline function pushed onto the stack of a newly created * process in order to do some additional setup. The trampoline is entered by * cpu_switchto()ing to the process, so we abuse the callee-saved * registers used by cpu_switchto() to store the information about the * stub to call. * NOTE: This function does not have a normal calling sequence! */ ENTRY(lwp_trampoline) movl %ebp,%edi /* for .Lsyscall_checkast */ xorl %ebp,%ebp pushl %edi pushl %eax call _C_LABEL(lwp_startup) addl $8,%esp pushl %ebx call *%esi addl $4,%esp jmp .Lsyscall_checkast /* NOTREACHED */ END(lwp_trampoline) /* * sigcode() * * Signal trampoline; copied to top of user stack. Used only for * compatibility with old releases of NetBSD. */ ENTRY(sigcode) /* * Handler has returned here as if we called it. The sigcontext * is on the stack after the 3 args "we" pushed. */ leal 12(%esp),%eax /* get pointer to sigcontext */ movl %eax,4(%esp) /* put it in the argument slot */ /* fake return address already there */ movl $SYS_compat_16___sigreturn14,%eax int $0x80 /* enter kernel with args on stack */ movl $SYS_exit,%eax int $0x80 /* exit if sigreturn fails */ .globl _C_LABEL(esigcode) _C_LABEL(esigcode): END(sigcode) /* * int setjmp(label_t *) * * Used primarily by DDB. */ ENTRY(setjmp) movl 4(%esp),%eax movl %ebx,(%eax) /* save ebx */ movl %esp,4(%eax) /* save esp */ movl %ebp,8(%eax) /* save ebp */ movl %esi,12(%eax) /* save esi */ movl %edi,16(%eax) /* save edi */ movl (%esp),%edx /* get rta */ movl %edx,20(%eax) /* save eip */ xorl %eax,%eax /* return 0 */ ret END(setjmp) /* * int longjmp(label_t *) * * Used primarily by DDB. */ ENTRY(longjmp) movl 4(%esp),%eax movl (%eax),%ebx /* restore ebx */ movl 4(%eax),%esp /* restore esp */ movl 8(%eax),%ebp /* restore ebp */ movl 12(%eax),%esi /* restore esi */ movl 16(%eax),%edi /* restore edi */ movl 20(%eax),%edx /* get rta */ movl %edx,(%esp) /* put in return frame */ movl $1,%eax /* return 1 */ ret END(longjmp) /* * void dumpsys(void) * * Mimic cpu_switchto() for postmortem debugging. */ ENTRY(dumpsys) pushl %ebx /* set up fake switchframe */ pushl %esi /* and save context */ pushl %edi movl %esp,_C_LABEL(dumppcb)+PCB_ESP movl %ebp,_C_LABEL(dumppcb)+PCB_EBP call _C_LABEL(dodumpsys) /* dump! */ addl $(3*4), %esp /* unwind switchframe */ ret END(dumpsys) /* * struct lwp *cpu_switchto(struct lwp *oldlwp, struct lwp *newlwp, * bool returning) * * 1. save context of oldlwp. * 2. restore context of newlwp. * * Note that the stack frame layout is known to "struct switchframe" in * and to the code in cpu_lwp_fork() which initializes * it for a new lwp. */ ENTRY(cpu_switchto) pushl %ebx pushl %esi pushl %edi movl 16(%esp),%esi /* oldlwp */ movl 20(%esp),%edi /* newlwp */ movl 24(%esp),%edx /* returning */ /* Save old context. */ movl L_PCB(%esi),%eax movl %esp,PCB_ESP(%eax) movl %ebp,PCB_EBP(%eax) /* Switch to newlwp's stack. */ movl L_PCB(%edi),%ebx movl PCB_EBP(%ebx),%ebp movl PCB_ESP(%ebx),%esp /* * Issue XCHG, rather than MOV, to set ci_curlwp := newlwp in * order to coordinate mutex_exit on this CPU with * mutex_vector_enter on another CPU. * * 1. Any prior mutex_exit by oldlwp must be visible to other * CPUs before we set ci_curlwp := newlwp on this one, * requiring a store-before-store barrier. * * (This is always guaranteed by the x86 memory model, TSO, * but other architectures require a explicit barrier before * the store to ci->ci_curlwp.) * * 2. ci_curlwp := newlwp must be visible on all other CPUs * before any subsequent mutex_exit by newlwp can even test * whether there might be waiters, requiring a * store-before-load barrier. * * (This is the only ordering x86 TSO ever requires any kind * of barrier for -- in this case, we take advantage of the * sequential consistency implied by XCHG to obviate the * need for MFENCE or something.) * * See kern_mutex.c for details -- this is necessary for * adaptive mutexes to detect whether the lwp is on the CPU in * order to safely block without requiring atomic r/m/w in * mutex_exit. */ movl %edi,%ecx xchgl %ecx,CPUVAR(CURLWP) #ifdef XENPV /* if we are there, we're obviously not in user context. * reset ci_xen_clockf_* in case the splx() at the end of mi_switch() * triggers a deffered call do xen_timer_handler() */ movb $0, CPUVAR(XEN_CLOCKF_USERMODE) movl $_C_LABEL(cpu_switchto), CPUVAR(XEN_CLOCKF_PC) #endif /* Skip the rest if returning to a pinned LWP. */ testl %edx,%edx jnz switch_return /* Switch ring0 stack */ #ifdef XENPV pushl %edi call _C_LABEL(i386_switch_context) addl $4,%esp #else movl PCB_ESP0(%ebx),%eax movl CPUVAR(TSS),%ecx movl %eax,TSS_ESP0(%ecx) #endif /* Switch the dbregs. */ pushl %edi pushl %esi call _C_LABEL(x86_dbregs_switch) addl $8,%esp /* Switch the FPU. */ pushl %edx pushl %edi pushl %esi call _C_LABEL(fpu_switch) addl $8,%esp popl %edx /* Don't bother with the rest if switching to a system process. */ testl $LW_SYSTEM,L_FLAG(%edi) jnz switch_return #ifndef XENPV /* Restore thread-private %fs/%gs descriptors. */ movl CPUVAR(GDT),%ecx movl PCB_FSD(%ebx),%eax movl PCB_FSD+4(%ebx),%edx movl %eax,(GUFS_SEL*8)(%ecx) movl %edx,(GUFS_SEL*8+4)(%ecx) movl PCB_GSD(%ebx),%eax movl PCB_GSD+4(%ebx),%edx movl %eax,(GUGS_SEL*8)(%ecx) movl %edx,(GUGS_SEL*8+4)(%ecx) #endif /* !XENPV */ /* Switch I/O bitmap */ movl PCB_IOMAP(%ebx),%eax orl %eax,%eax jnz .Lcopy_iobitmap movl CPUVAR(TSS),%eax movl $(IOMAP_INVALOFF << 16),TSS_IOBASE(%eax) .Liobitmap_done: /* Is this process using RAS (restartable atomic sequences)? */ movl L_PROC(%edi),%eax cmpl $0,P_RASLIST(%eax) je no_RAS /* Handle restartable atomic sequences (RAS). */ movl L_MD_REGS(%edi),%ecx pushl TF_EIP(%ecx) pushl %eax call _C_LABEL(ras_lookup) addl $8,%esp cmpl $-1,%eax je no_RAS movl L_MD_REGS(%edi),%ecx movl %eax,TF_EIP(%ecx) no_RAS: #ifdef XENPV pushl %edi call _C_LABEL(i386_tls_switch) addl $4,%esp #endif switch_return: /* Return to the new LWP, returning 'oldlwp' in %eax. */ movl %esi,%eax popl %edi popl %esi popl %ebx ret .Lcopy_iobitmap: /* Copy I/O bitmap. */ incl _C_LABEL(pmap_iobmp_evcnt)+EV_COUNT movl $(IOMAPSIZE/4),%ecx pushl %esi pushl %edi movl %eax,%esi /* pcb_iomap */ movl CPUVAR(TSS),%edi leal TSS_IOMAP(%edi),%edi rep movsl popl %edi popl %esi movl CPUVAR(TSS),%eax movl $(IOMAP_VALIDOFF << 16),TSS_IOBASE(%eax) jmp .Liobitmap_done END(cpu_switchto) /* * void savectx(struct pcb *pcb); * * Update pcb, saving current processor state. */ ENTRY(savectx) movl 4(%esp),%edx /* edx = pcb */ movl %esp,PCB_ESP(%edx) movl %ebp,PCB_EBP(%edx) ret END(savectx) /* * syscall() * * Trap gate entry for syscall */ IDTVEC(syscall) pushl $2 /* size of instruction for restart */ pushl $T_ASTFLT /* trap # for doing ASTs */ INTRENTRY STI(%eax) #ifdef DIAGNOSTIC movzbl CPUVAR(ILEVEL),%ebx testl %ebx,%ebx jz 1f pushl $5f call _C_LABEL(panic) addl $4,%esp #ifdef DDB int $3 #endif 1: #endif /* DIAGNOSTIC */ addl $1,CPUVAR(NSYSCALL) /* count it atomically */ adcl $0,CPUVAR(NSYSCALL)+4 /* count it atomically */ movl CPUVAR(CURLWP),%edi movl L_PROC(%edi),%edx movl %esp,L_MD_REGS(%edi) /* save pointer to frame */ pushl %esp call *P_MD_SYSCALL(%edx) /* get pointer to syscall() function */ addl $4,%esp .Lsyscall_checkast: /* Check for ASTs on exit to user mode. */ CLI(%eax) movl L_MD_ASTPENDING(%edi), %eax orl CPUVAR(WANT_PMAPLOAD), %eax jnz 9f HANDLE_DEFERRED_FPU #ifdef XENPV STIC(%eax) jz 14f call _C_LABEL(stipending) testl %eax,%eax jz 14f /* process pending interrupts */ CLI(%eax) movzbl CPUVAR(ILEVEL), %ebx movl $.Lsyscall_resume, %esi /* address to resume loop at */ .Lsyscall_resume: movl %ebx,%eax /* get cpl */ movl CPUVAR(IUNMASK)(,%eax,4),%eax andl CPUVAR(IPENDING),%eax /* any non-masked bits left? */ jz 17f bsrl %eax,%eax btrl %eax,CPUVAR(IPENDING) movl CPUVAR(ISOURCES)(,%eax,4),%eax jmp *IS_RESUME(%eax) 17: movb %bl, CPUVAR(ILEVEL) /* restore cpl */ jmp .Lsyscall_checkast 14: #endif /* XENPV */ #ifdef DIAGNOSTIC cmpb $IPL_NONE,CPUVAR(ILEVEL) jne 3f #endif INTRFASTEXIT #ifdef DIAGNOSTIC 3: STI(%eax) pushl $4f call _C_LABEL(panic) addl $4,%esp pushl $IPL_NONE call _C_LABEL(spllower) addl $4,%esp jmp .Lsyscall_checkast 4: .asciz "SPL NOT LOWERED ON SYSCALL EXIT\n" 5: .asciz "SPL NOT ZERO ON SYSCALL ENTRY\n" #endif 9: cmpl $0, CPUVAR(WANT_PMAPLOAD) jz 10f STI(%eax) call _C_LABEL(pmap_load) jmp .Lsyscall_checkast /* re-check ASTs */ 10: /* Always returning to user mode here. */ movl $0, L_MD_ASTPENDING(%edi) STI(%eax) /* Pushed T_ASTFLT into tf_trapno on entry. */ pushl %esp call _C_LABEL(trap) addl $4,%esp jmp .Lsyscall_checkast /* re-check ASTs */ IDTVEC_END(syscall) /* * int npx586bug1(int a, int b) * Used when checking for the FDIV bug on first generations pentiums. * Anything 120MHz or above is fine. */ ENTRY(npx586bug1) fildl 4(%esp) /* x */ fildl 8(%esp) /* y */ fld %st(1) fdiv %st(1),%st /* x/y */ fmulp %st,%st(1) /* (x/y)*y */ fsubrp %st,%st(1) /* x-(x/y)*y */ pushl $0 fistpl (%esp) popl %eax ret END(npx586bug1) ENTRY(intrfastexit) movw TF_GS(%esp),%gs movw TF_FS(%esp),%fs movw TF_ES(%esp),%es movw TF_DS(%esp),%ds movl TF_EDI(%esp),%edi movl TF_ESI(%esp),%esi movl TF_EBP(%esp),%ebp movl TF_EBX(%esp),%ebx movl TF_EDX(%esp),%edx movl TF_ECX(%esp),%ecx movl TF_EAX(%esp),%eax addl $(TF_PUSHSIZE+8),%esp iret END(intrfastexit) .section .rodata /* * Hotpatch templates. */ LABEL(hp_nolock) nop LABEL(hp_nolock_end) LABEL(hp_retfence) lfence LABEL(hp_retfence_end) LABEL(hp_clac) clac LABEL(hp_clac_end) LABEL(hp_stac) stac LABEL(hp_stac_end)