Here is some advice from maxfield@ix.netcom.com (Wade Maxfield) on how
to use Samba with OS/2 Warp.

Note that you may also find ftp://ftp.cdrom.com/pub/os2/new/os2net.faq
useful.



        Can I use Samba with Warp?

        Yes.  The MSClient software at ftp.microsoft.com in the Bussys
(lanman os2 directory) will work, sort of.  It is version 2.2c

        First, uncloack os2ver.  (attrib -h -r -s c:\os2ver).  It is a
text file.  change netwksta.xxx to 20=netwksta.sys.  Also add
20=setup.exe.  Another change will be needed, a .vdd file.  I remember
it came up during the installation as being a wrong version.  I wrote
the name down, changed os2ver to include it, and restarted the
installation.

        Don't reboot, or you'll be sorry.  (The best thing to do is
enable the automatic backup mechanism for recovering old config.sys and
other filse in OS/2.  It paid for itself during this installation
nightmare)

        Next, (or perhaps before this), if you have an NE2000 adaptor,
get the ns2000 files from hobbes.nmsu.edu (in ns2000.zip).  I manually
patched protocol.ini to refer to that adaptor, and copied it into my
c:\lanman directory.  It might install as an "other" adaptor.

        Finally, the system expects to be on a domain with a domain
server.  BTW, TCP/IP and NetBeui allow simultaneous communication with
Os/2 lanserver 4.0, and Samba.  (Note: Lanserver 4.0 won't yet to
TCP/IP.  (Well,it might, but it crashes before I get to that point, so I
havent' been able to enable it)



