@1.44Mb SliTaz 4.0 floppy images

fd001.img fd002.img fd003.img fd004.img
fd005.img fd006.img fd100.img fd101.img
fd102.img fd103.img fd104.img fd105.img
fd200.img fd201.img fd202.img fd203.img
fd204.img fd300.img fd301.img fd302.img
fd303.img fd304.img fd305.img fd306.img
fd307.img fd308.img md5sum

Available boot floppies

Floppy image set

This floppy set will boot a Slitaz stable version. You can write floppies with SliTaz bootfloppybox, Windows rawrite or simply dd:

# dd if=fd001.img of=/dev/fd0

If you have a CD-ROM, an USB port and an USB key or a network card, but you can't boot these devices directly, then try floppy-grub4dos first. This 1.44Mb floppy provides tiny programs to boot these devices without BIOS support and some other tools.

You can start with one of the 4 following flavors :

Start your computer with fd001.img. It will show the kernel version string and the kernel cmdline line. You can edit the cmdline. Most users can just press Enter.

The floppy is then loaded into memory (one dot each 64k) and you will be prompted to insert the next floppy, fd002.img. And so on up to fd006.img.

The base flavor will then start and you will be prompted to insert extra floppies for justx and core flavors. You can bypass this by using Q and Enter.

Each floppy set detects disk swaps and can be used without a keyboard.

If you have an ext3 partition on your hard disk, the bootstrap can create the installation script slitaz/install.sh. You will be able to install SliTaz on your hard disk without extra media.

Good luck.

ISO image floppy set

The floppy image set above includes an embedded installer and can install SliTaz on your hard disk.

Anyway you may want these ISO images to install SliTaz

You can restore the ISO image on your hard disk using :

# dd if=/dev/fd0 of=fdiso01.img
# dd if=/dev/fd0 of=fdiso02.img
# ...
# cat fdiso*.img | cpio -i

Images generation

All these floppy images are built with bootfloppybox from a core or a 4in1 iso. The loram is preprocessed by tazlitobox (Low RAM tab). These tools are available since 3.0. You can extract the kernel, cmdline and rootfs files with this tool

Copyright © SliTaz - GNU General Public License

Valid XHTML 1.0